Check out what Phil Heberer wrote on 05 Jan 98  18:43:28:
 > Hello Brian,
 > On (02 Jan 98) cybercadet Brian Tipling wrote to Mike Martin...
MM> thanks for the help, I feel a little bit ripped off though, I could ha
MM> saved myselfe $50 and just got a 28.8 and still connect at 26400.  Kin
MM> blows.  Maybe I should just connect to the internet via Cable instead 
MM> phone lines anyhow and just use the modem for BBS use...
 BT>     I always get 28.8 connections with my 33.6 SupraFaxModem when I
 BT> call boards that support the speed...  I don't know how much faster i
 BT> will go, as I've never called a faster board...  BTW, I don't do the
 BT> I'net, so I don't know what would happen there...
 > *I* have the Supra Express SP 33.6 internal modem, and previously
 > could
 > only get 26400 connects as my best. After my ISP switched from
 > Southwestern Bell to MCI T1 connection, I'm pretty consistently now
 > getting 33.6 connects!  A lot depends on line conditions, and my
 > area seems to have fairly "dirty" lines (ESPECIALLY when the ground is
 > wet!) Anyway, MY two cents worth.
a buddy of mine runs the bbs that I often connect to and he also happens to 
work for the local telephone company here, he checked all the lines in my 
area back to the main ISP access point and did some minor repairs.  But I 
still connect at 26400.  BUT get this on the BBS at his place his supra shows 
a 33600 (in the led) connection and I only show a 26400 (I have the external 
express so no led) on my end why would this be?
I have tried W , W1, W2 and all three show the port speed upon connect 
(115200) not until I set the S95 register to 1 do I get the modem speed.
here is my init:
AT&F2&D0S95=1S11=35
Is this the correct way to get the modem connect speed?
Thanks
mike martin
--- DLG Pro v1.16/DLGMail v2.52
---------------