-=> Quoting Frank Bell to Carlos Boquin <=-
 -=> On 10-15-96  17:12, Carlos Boquin wrote Winfred Hu <=-
 
 CB> no problems whatsoever with any other protocol except zmodem. When I
 CB> used 4.20, it always happen around the 26k mark, every file type, evry
 FB> I can't comment on 4.21, but I have been using 4.20 and have had no
 FB> difficulties with either uploads or downloads, other than those
 FB> attributable to line noise.  For example, when I have the computer
 FB> plugged into a certain outlet, I have problems; when I plug it into a
 FB> different outlet (same line, same phone #, just a different jack) no
 FB> problems.  IMO, it's unlikely that the problem you are experiencing
 FB> is due to a bug in TM.
     I thought that may have been a problem, but I have used the modem in 6
     outlets in two seperate homes, and I have used the same init string with
     comm programs (ie Telix, Procomm, among others). Yet Telemate is the 
nly
     comm program that gives me the problem with the uploads! It just drives
     me up the wall, the program is so versatile (especially the multitasking
     aspect of it). Believe me, I have tried to isolate the problem(s) that 
may
     be causing the upload problem with no success.
 FB> However, it could have something to do with your modem.  I would
 FB> suggest checking you modem init string.  With my USR Sportster, I did
 FB> have some problems until I got the init string fine tuned (USR's are
 FB> tremendously versatile, but with the versatility seems to come a
 FB> little bit of temperameng [g]).
     I, I have had to tweak the modem settings until they gave me just what
     I wanted it to show me, but naturally may not be the best settings to
     work with. If you don't mind, I would like to show you below my init
     string, just perhaps you might see something wrong that my limited
     knowledge of the intricacies of modems. BTW I am using a Supra 14.4
     internal with caller id, and here is my init string:
     AT&F2S95=35S7=60#CID=1
 FB> Hope this helps!
     Perhaps by looking at the init string, you might see something normally
     left off or put on for others that make operation smoother.
     Like I said earlier, what irks me the most is that this same init string
     works with all the other comm programs, no problem with the uploads.
     Carlos Boquin
  
SEM,,,
,,,( ( ( ( ( ( ( 

,,_vav
___ Blue Wave/DOS v2.30 [NR]
--- WILDMAIL!/WC v4.12 
---------------