In a message of  Brien Page (1:116/305) writes:
 BP> I have just bought a used external Courier V.Everything modem to use on 
 BP> my BBS.  The following is the ati7 screen.  Is there a later firmware 
 BP> upgrade I should get for it?  This is my first USR modem and I'm still 
 BP> trying to get a good init string set up and thought if there is later 
 BP> firmware to download, it would probably be better to do that first.  
 BP> Thanks for any information you can help with.
Yes, there is later firmware, here's what I'm running:
ati7
USRobotics Courier V.Everything Configuration Profile...
Product type           US/Canada External
Options                HST,V32bis,Terbo,VFC,V34+,x2,V90
Fax Options            Class 1,Class 2.0
Clock Freq             20.16Mhz
Flash ROM              512k
Ram                    64k
Supervisor date        03/13/98
DSP date               03/13/98
Supervisor rev         7.3.14
DSP rev                3.0.13
Note that x2 and/or V90 will not be enabled unless you purchase the enabling 
key from USR.  For an Init string, I'd suggest starting with an AT&F1 
followed by an AT&W to write the settings into the NVRAM.  This sets the 
Hardware Flow control template (RTS/CTS) so set your software accordingly.
   Gene Lowry
 
--- msged 2.07
---------------