Yo! Scott:
Thursday July 24 1997 12:18, Scott Hoffman wrote to All:
SH> Does anyone have the full specifications for the WinRadio
SH> hardware/software package? Does the company that make it have some
SH> kind of Web Site where I can get more info? Also.. Any opinions
SH> from people who have used that receiver, know of any problems? etc..
An older set of specs is posted below. They have changed, especially speed
and tuning steps, but also phase noise and sensitivity have since been
improved.
The US Web Site is: http://www.winradio.com
There are no inherent problems of a serious "bug" nature with WinRadio. They
recently added a spectrum analyzer to the software and boy is that ever cool!
Bill Cheek ~ bcheek@san.rr.com
Windows 95 Juggernaut Team ~ Microsoft MVP
==================================
WiNRADiO Technical Specifications
Frequency range; AM-SSB-FM-N: 0.5 MHz to 1.3 GHz
FM-W: 30.0 MHz to 1.3 GHz
Tuning step size 0.5 kHz to 1 MHz
(BFO: 5 Hz)
Mode AM-SSB/CW-FM-N-FM-W
Sensitivity AM SSB/CW FM-N FM-W
0.5 - 1.5 MHz 5 uV 2.5uV 1 uV -
1.5 - 30 MHz 1.5uV 1 uV 0.35uV -
30 - 1000 MHz 1.5uV 1 uV 0.35uV 2uV
1 - 1.3 GHz 5 uV 2.5uV 1 uV 3uV
Image/spurious rejection: 5 - 513 MHz: 65dB
798 - 1300 MHz: 30dB
Dynamic range 65dB
Signal meter linearity +/- 5dB
Selectivity AM/SSB: 6kHz @ -6dB
FM-N: 17kHz @ -6dB
FM-W: 280kHz @ -6dB
Scanning speed AM: 10 channels/second
FM: 20 channels/second
Intermediate frequencies IF1 IF2
0.5 - 299.999 MHz 556.325 MHz 58.075 MHz
300 - 512.999 MHz 249.125 MHz 58.075 MHz
513 - 797.999 MHz 58.075 MHz -
798 - 1105.999 MHz 249.125 MHz 58.075 MHz
1106 - 1300 MHz 556.325 MHz 58.075 MHz
IF3
AM-SSB-FMN 455 kHz
FMW 10.7 MHz
Frequency stability 10 ppm 0 to 60 degrees C
Antenna connector 50 ohm BNC
Audio output 0.2W into 8 ohm load
Specifications subject to change without notice.
--- Hertzian Mail+
---------------
* Origin: Do you reckon a frog's ass is water-tight? (1:202/731)
|