Jeff Edmonson wrote in a message to Bruce LeGrande:
 >  JE> Sounds like an all-band vertical, Bruce.
 >  JE> See if you can find an antenna analyzer and feed the signal output
 >  JE> and find out where the thing is resonant at.  I'm gonna bet that
 >  JE> it's 80 through 10 - but with 164 turns at the base, it might even
 >  JE> cover 160m!
 > I -KNEW- I should have put those "L"s in the opposite order :)))
 > The 164 turn coil (L4) is actually at the top, and L1 is the
 > first coil that the circuit (transmission line) sees (bottom)...
 > Does this change your outlook ? ;)
 JE> Not really... seems like a capacitance hat configuation, maybe... 
 JE> Find someone who's GOT an Analyzer and get that thing checked out
 JE> ;-)
Jeff! I reiterate...  I am in a very rural (and depressed) area...
I know of NO one that has an analyzer.  Thought I made this clear, sorry.
ALL: Isn't there an Elmer out there that recognizes this array ???
     Or has some suggestions of mfgr/model numbers ?  I don't mind
     contacting several mfgrs to obtain diagrams of their products
     as long as I eventually find the same one.  There CAN'T be THAT
     many different units in HamDom configured this same way ?!?!
     I'm SURE it's not a "new" unit (as it shows MUCH wear at the
     slipjoints and on the elements), we're probably looking at a
     model that was in production around 10 (maybe more) years ago.
Sincerely,
           Bruce - kb6lwn@qsl.net - ck@saber.net
--- WtrGate v0.93 Unreg
---------------