| TIP: Click on subject to list as thread! | ANSI |
| echo: | |
|---|---|
| to: | |
| from: | |
| date: | |
| subject: | Re: new hard drive, new problems |
From: Ellen K.
Thanks, I saved that. :)
On Tue, 12 Nov 2002 01:09:05 -0800, You Can
wrote in message
:
>Geo. posted the following to homeless.nthelp:
>
>> "Adam Flinton" wrote in message
>> news:3dcf7785$1{at}w3.nls.net...
>>
>> > > Geo. (note to John O, my bios recognizes the 185g drives
just fine)
>> > >
>> >
>> > That's just cruel.......away from his bleeding wounds with
your salt &
>> > carbolic...you fiend
>>
>> further update, even though bios is supposed to support it it still doesn't
>> work. Am limited to 127.94mb for some reason. Bios is dated August 2002.
>>
>> I'm being told I need to install some intel software thingie to use it. Will
>> let you know how that goes but that to me suggests intel chipset not system
>> bios.
>>
>> Geo.
>>
>>
>>
>Geo.,
>I read this in a resent newsletter. It's for XP but may apply to W2K:
>TIP: RECOGNIZING A DRIVE'S TOTAL CAPACITY
> (contributed by David Chernicoff, david{at}winnetmag.com)
>
>Because extreme-capacity ATA hard drives are becoming so commonplace,
>I decided to upgrade one of my computers with a 160GB hard disk. You
>can imagine my annoyance when the computer didn't recognize the hard
>disk's total capacity. To get the hard disk to work correctly, I had
>to do two things (if you install a hard disk that has a capacity of
>more than 137GB, you'll need to take these same steps).
>
>First, I had to check the BIOS to make sure that 48-bit Logical Block
>Addressing (LBA) support is available. For my system, I needed to
>download and install a BIOS upgrade to my Promise Technology Ultra 100
>ATA controller card.
>
>Second, I had to upgrade my Windows XP computer to Service Pack 1
>(SP1) and modify the registry by performing the following steps
>(48-bit LBA support is currently only available in Windows XP):
> 1. Launch regedit.
> 2. Open the
>HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atapi\Parameters
>registry subkey.
> 3. Add a REG_DWORD value name EnableBigLba and set its value to 1.
> 4. Exit regedit.
> 5. Reboot.
--- BBBS/NT v4.01 Flag-4
* Origin: Barktopia BBS Site http://HarborWebs.com:8081 (1:379/1.45)SEEN-BY: 3/2 10 106/1 120/544 123/500 379/1 633/260 267 270 285 774/0 605 SEEN-BY: 2432/200 @PATH: 379/1 106/1 123/500 774/605 633/260 285 |
|
| SOURCE: echomail via fidonet.ozzmosis.com | |
Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.