Hi Albert.  In response to your uploading problems with your USR
Sportster.  When I first got mine, I had the same problem.  I may not
be able to help you with yours, but I'll tell you how I fixed mine, and
maybe that will help.  I too was told to drop the baud rate to 19200 and
up it gradually.  However, I kept thinking "I have a 28.8 modem, why
should I not be able to utilize that speed". This is what I did:
1)  I changed the init string to ATZ^M~~~AT L3^M
    (The AT L3 is to make the my internal modem louder)
2)  In the dial list for each board, I checked the default option rather
    than an actual baud rate.
3)  In the option menu under Dial Setup, there is where I set the
    baud rate for 115200.
4)  I checked the flow control for RTS/CTS (As I see you have)
5)  I made sure the Auto Baud Detect option in the Options menu for
    Dial setup was not checked.
Since I have changed all of the above I have had no problems.
  I hope this helps.
Also, you mentioned not being able to change your baud rate in the
control panel higher than 19200.  Mine is the same.  I believe that
the time WFWG came out, that was supposed to be a killer speed for
modems.  I don't use a windows comm program, so it really doesn't affect
me anyway.
Good luck, and I hope you figure it all out.
Shirl
--- GEcho 1.20/Pro
---------------