On 06/10/17, Wilfred van Velzen pondered and said...
 
 Wv> Probably. If you have defined or use some hudson areas, and messages end
 Wv> up in them, you are bound to run out of space at some point in time.
 Wv> Of course you can automate things by running the FTools commands in a
 Wv> periodic maintenance batch job. I'm running 'FToolsW32.exe MAINT /D /N
 Wv> /O /P' every night...

I'm running this at the moment every night but that's not addressing the
issue it would seem.

[snip]

1:03.928  Maint /D /N /O /P /R
23:51:03.928  Processing hudson message base
23:51:03.944  Deleted     : 0 msgs
23:51:04.115  Space saved (Hudson) : 0 bytes
23:51:04.115  Processing jam area: ALT.BBS
23:51:04.147  Processing jam area: ALT.BBS.ADS
23:51:04.225  Processing jam area: ALT.BBS.ALLSYSOP
23:51:04.240  Processing jam area: ALT.BBS.AMIGA.CNET
23:51:04.271  Processing jam area: ALT.BBS.DOORS

[snip]

23:53:24.484  Processing jam area: UK.TECH.BROADCAST
23:53:24.562  Space saved (JAM) : 8766614 bytes
23:53:24.562  Maint Active: 140.634 sec.

[snip]


I don't have any bad, dupe or recovery boards defined, only a netmail board
which is number 1, I think this is the only hudson base.

I'm unsure how to access the netmail base to clear it / inspect it.

Will keep pondering... fair to say my attention is divided at the momemt so
have not looked at this setup too closely 

--- Mystic BBS v1.12 A33 (Windows/32)