From: Ralph Mowery 
Reply-To: rmowery@ibm.net
> 
> >Sounds like you are trying to use one of the am6154 ITT amps ?
> Am6155,Same thing...I see ya can replace the 8930 with 4cx400a & gain an 
extra
> 100 watts & run alot cleaner...The mods are on the svetlana site...
> 
>  RM> If so, expect about 50 watts out continious, but for short
>  RM> duty it will do around 400 watts on ssb or cw.  I have been
> 
> I found all the data sheets on the eimac site so have some clue now.I would
> expect alot more then 50 watts am from it as a freind of mine gets 300 am 
out of
> a pair of 4cx250b's.Also the fact that ive butchered the uneffeciant 
The Amp will do around 400 watts out.  That 50 watts was continious key
dow for long time like a TV signal.  The power supply/ fan is probably
the limitation on the am6154/6155 amps.  Unless changed the heat sensor
will cut it off after about 30 seconds of keydown time at 400 or so
watts.
--- ifmail v.2.11
---------------