Hello Wilfred,

On Fri Aug 04 2017 08:40:34, Wilfred van Velzen wrote to Nicholas Boel:

 WV>>> Makefiles are on the top of my to-do list. ;)

 NB>> If you aren't going to be able to get to the makefiles for a bit,

 WV> Once I start on it, it shouldn't take that long. But I haven't worked
 WV> on FMail for a couple of weeks now...

That will eventually be the route I go when they're available, as I'd like
to eventually set this up on a GUI-less system. I've installed Ubuntu Mate
32bit on my other raspi3 for now just to play with the FMail code. Once I'm
able to compile it for aarch32 I will most likely re-install 32bit
Archlinux.

 WV> It should be, and maybe adapt some paths in the project file to your
 WV> system...

That's a given.

 WV> I used the Windows codeblocks project files for the linux version to
 WV> start with, and the changes were minimal. So going from one linux
 WV> distribution to the other should be easy...

Okay.

 NB>> I already have gcc 7.1.1 installed.

 WV> I'm using 4.8.5, so I don't know how it will compile with this newer
 WV> compiler...

Bleh. So far behind the times. ;)

 NB>> Is there any hiccups in compiling for 64bit Linux at the moment

 WV> Not that I'm aware of. The version I'm using is a 64bit compile. And
 WV> for the functionality I'm using on my system it works flawless...

Ok, good to know. I had some issues trying to get a GUI installed on the
64bit Archlinux install, and it seemed like some programs, while they may
have been ported to install properly on aarch64, didn't work as expected.
Running "lspci" on my 32bit raspi3 would at least give an error
that it can't open /proc/bus/pci. The 64bit version said absolutely nothing
- and the 64bit version is not well supported, if at all. So I think I'll
stick with 32bit on those things. ;)

 NB>> (obviously the ARM support may bring in it's own problems, but
 NB>> besides that..)?

 WV> Obviously. ;)

Can't hurt to give it a shot though. I'll let you know if I run into any issues.

Regards,
Nick

... "Не знаю. Я здесь только работаю."
--- GoldED+/LNX 1.1.5-b20170303