Hi all!

I already have binkit configured as node for several nets. (fido, fsx,
micronet, etc) this just work fine.

My fido node are 4:902/26 and also, for testing purpose, i have some
points as downlinks for my fidonet node (ex: 4:902/26.3, 4:902/26.5, etc)

This also works. I can add/remove areas from the "sbbsecho areafix" from
these points and get these packets.

Now, i thinking on receive the 4:900 segment to get downlink
nodes/clients like 4:900/10, 4:900/11, etc. (I think that this setup
called "fidonet hub" mode)

My questing are:

Should I add the 4:900 on scfg->networks->fidonet->system addresses
or must be a node aka like 4:900/0 ?

This is my actual linked nodes:


[·][?]────────────────────────
─────────────────┐
│                  Linked Nodes                 │
├─────────────────────────�
��─────────────────────┤
│ │1:ALL            (.001)                      │
│ │2:ALL            (.002)                      │
│ │3:ALL            (.003)                      │
│ │4:ALL            (.004)                      │
│ │4:902/26.3       (0386001a)  Fernando Toledo │
│ │4:902/26.10      (0386001a)  Fernando Toledo │
│ │4:902/26.5       (0386001a)  Gateway         │
│ │4:90/1           (005a0001)  Momia BBS       │
│ │21:2/100         (00020064)  FSXNET Hub      │
│ │21:ALL           (.015)      FSXNET NET      │
│ │618:ALL          (.26A)      Micronet NET    │
│ |618:500/1        (01f40001)  Micronet HUB    │
└─────────────────────────�
��─────────────────────┘

I already have a node setting to 4:90/1 to get packets for my actual
node (4:902/26)

Should i add another (duplicated) 4:90/1 settings to get the 4:900/xxxx
?? (will generate a new poll to my boos?)

When add a new node downlink (ej 4:900/100) the RouteTo settings have to
let it empty??

I paste my relevant settings of sbbsecho.ini


[node:1:ALL@fidonet]
 Route = 4:90/1
 LocalAddress = 4:902/26
[node:2:ALL@fidonet]
 Route = 4:90/1
 LocalAddress = 4:902/26
[node:3:ALL@fidonet]
 Route = 4:90/1
 LocalAddress = 4:902/26
[node:4:ALL@fidonet]
 Route = 4:90/1
 LocalAddress = 4:902/26
[node:4:902/26.3@fidonet]
 Status = Hold
 LocalAddress = 4:902/26
[node:4:902/26.10@fidonet]
 Status = Hold
[node:4:902/26.5@fidonet]
 Status = Hold
 LocalAddress = 4:902/26
[node:4:90/1@fidonet]
 Status = Normal
 LocalAddress = 4:902/26
 BinkpHost = momiabbs.no-ip.info
 BinkpPort = 24554
 BinkpPoll = true
[node:21:2/100@fsxnet]
 Status = Normal
 BinkpHost = error404bbs.ddns.net
 BinkpPort = 24555
 BinkpPoll = true
[node:21:ALL@fsxnet]
 Status = Normal
 Route = 21:2/100
[node:618:ALL@micronet]
 Status = Normal
 Route = 618:500/1
 LocalAddress = 618:500/45
[node:618:500/1@micronet]
 Status = Normal
 LocalAddress = 618:500/45
 BinkpHost = bbs.darkrealms.ca
 BinkpPort = 24554
 BinkpPoll = true
[domain:fidonet]
 Zones = 1,2,3,4
 DNSSuffix =
 NodeList = /sbbs/fido/NODELIST.FIDO
[domain:fsxnet]
 Zones = 21
 DNSSuffix =
 NodeList = /sbbs/fido/NODELIST.FSXNET
[domain:micronet]
 Zones = 618
 DNSSuffix =
 OutboundRoot = /sbbs/fido/outbound
 NodeList = /sbbs/fido/NODELIST.MICRONET


Sorry my english, and noob questions.. i want to learn and investigate
if are possible to get a complete routing system using synchronet
binkit+sbbsecho or need external aplication to do this work.

 Thanks!

---
 ￭ Synchronet ￭ Dock Sud BBS TLD 24 HS - bbs.docksud.com.ar