G'day David,



On 22-05-95 11:05, David Galbraith said to All



 DG> I am currently attempting to send a file to Paul.  Unfortunately 

 DG> I am experiencing difficulties in doing so.  The first packet is 

 DG> sent successfully and the transfer terminates with an error 

 DG> immediately after this.



Same thing happened to me. It'll send 8192 bytes and then die with an 'error'.



 DG> I am using a Netcomm M7F series 3 with ROM revision 096L.  I have 

 DG> hardware flow control enabled and belive that my cable also 

 DG> supports this although I am unable to verify this.



It's the modem. I have a Netcomm M7F Series 3, ROM version 098E. This was
the latest ROM available at Christmas 1994. My previous ROM was 097K.



 DG> I have include two excrepts from my log below.  In each case one 

 DG> packet was sent before the transfer terminated.  The logs are 

 DG> from two sessions using BTPE 3.02 but it would not appear to be a 

 DG> Binkley problem as the exact same thing happens using BT 

 DG> 2.50.



Hmmm, I wonder if the ROM version could be causing it (BTPE with the 098E
ROM fixed it for me). The one time I can remember trying to send a file
with the 097K ROM (not to TML), it didn't work.



If you want a free ROM upgrade, call Netcomm (Tech Support 805-1488) and
tell 'em that you can't connect to a Netcomm M34. I still can't connect to
an M34, but at least I can now send files with Binkley if I use BTPE.



 DG> + 22 May 10:42:02 BINK Synchronizing to Offset 8192

 DG> ! 22 May 10:42:20 BINK Error

 DG>   22 May 10:42:20 BINK Transfer cancelled

 DG> * 22 May 10:42:20 BINK End of WaZOO Session

 DG> * 22 May 10:42:20 BINK Session with 3:711/934{at}fidonet Time: 



Yep, same shit that used to happen to me. BTPE got rid of the problem for
me. Here's a copy of my binkley.cfg if that's any help.



>>



Port 2

Baud 38400

Prefix ATDT,

AnswerBack Jeff Green

System Greentrees

Sysop Jeff Green

Address 3:711/934.20{at}fidonet

BossPwd *******

StatusLog E:\EMAIL\MAILER.LOG

Downloads E:\EMAIL\IN\

NetMail E:\EMAIL\MAIL\

NetFile E:\EMAIL\IN\

KnownInbound E:\EMAIL\IN\

ProtInbound E:\EMAIL\PROT\

Hold E:\EMAIL\OUT\

CaptureFile Stuff.CAP

Carrier 80

SLOWMODEM

NOCOLLIDE

PreInit  |v``^``

Init ^...|ATM0S0=0S2=43|...

;Init ATZ|~~ATH0

TermInit ATZ|~~ATH0

Suffix ,

Busy v,^,,ATH0|v

;LogLevel 5

MaxReq 6

Unattended

Mark_Kromm

BoxType 1

MaxReq 100

MaxBytes 10000000

MaxTime 60

Timeout 60

Nodelist  e:\email\

Version7

;NoEMSI

;NoWazoo

MaxAreas e:\max\area.dat

LockBaud /REL

AutoBaud 

Domain fidonet fidonet nodex

SERIAL 100

Aftercall 28 ATS0=0|



>>



I haven't got a clue if all those commands are relevant to v2.50, but it
works, so I don't care :-)



Regards...Jeff (jeff{at}grntrs.dialix.oz.au)



... Just when I've found the answer, you change the question.



--- Sqed/32 0.97/r15123