-> Strange. That's almost EXACTLY my init string...but it only works on
-> dial out! :( (Actually I'm using ATS11=60S95=1M0L0DT for my dial
-> string. WAS using ATZ for my init...will try specifying dial speed,
-> silence, etc in my init...maybe that'll work!)
-> Funny...I was always able to store my configs, etc in the NVRAM on my
-> Microcom, but it wouldn't connect to my ISP...so I got this Supra
-> 56k...
Right John.  The reason that string only works when you dial out is
because it's in your "dial" string.  Also ATS95=1 is *not* the same as
ATS95=3.  This is what forces the modem to report the connect rate as
opposed to DTE.
Try this, ATS11=60S95=3M0&W0.  This will store these settings in NVRAM
for you.  Then you can use a simple ATDT for your dial string and
continue to use ATZ for your init string.
Elden
--- ViaMAIL!/WC4 v1.30 
---------------