-> Thanks for the input.
CH> Yup.  Same 1956 Chilton's Manual calls for 70-75 ft-lbs. for 7/16-14
 CH> head bolts, 1948 to 1948.  Doesn't specifically say 1940, but the
 CH> engine appears identical.  Manifold bolts not mentioned.  I'd go by
 CH> the generic torque spec for the class of bolt, probably grade 5
 CH> (three lines on top of the head).
 CH> Good luck on the project!
Thanks again for your help.  It should be almost together this weekend.
Cya
Tim
... System error - Press F13 to continue...
--- Ezycom V1.48g0 01fa0008
---------------