Path:
eternal-september.org!reader02.eternal-september.org!feeder.eternal-september.o
rg!aioe.org!.POSTED!not-for-mail
From: james{at}nospam.com
Newsgroups:
microsoft.public.windowsxp.general,microsoft.public.win98.gen_discussion
Subject: Re: floppy drives and cables
Date: Wed, 15 Nov 2017 20:46:48 -0600
Organization: Aioe.org NNTP Server
Lines: 45
Message-ID: 
References: 

 



NNTP-Posting-Host: TKghX/mglWkVW1qxlGBsyg.user.gioia.aioe.org
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Complaints-To: abuse{at}aioe.org
X-Newsreader: Forte Agent 2.0/32.652
X-Notice: Filtered by postfilter v. 0.8.2
Xref: feeder.eternal-september.org microsoft.public.windowsxp.general:134567
microsoft.public.win98.gen_discussion:17119

On Wed, 15 Nov 2017 21:51:50 +0000 (UTC), not{at}telling.you.invalid
(Computer Nerd Kev) wrote:

>In microsoft.public.win98.gen_discussion james{at}nospam.com wrote:
>> On Wed, 15 Nov 2017 14:16:24 +0000, "J. P. Gilliver (John)"
>>  wrote:
>> 
>>>In message , Paul
 
>>>writes:
>>>[]
>>>>The twisted part, consists of four active signals.
>>>>Two for each drive. The twist swaps the signals, so
>>>>that one connector can have an A personality and the
>>>>other a B personality. (Just like a CS Cable Select method.)
>>>[]
>>>I've always assumed it was that, and thought it was a clever solution 
>>>(admittedly, requiring unusual cable construction).
>>>
>>>So presumably there is something like (_at the drive_):
>>>
>>>01 - A
>>>10 - B
>>>
>>>(or vice versa).
>>>
>>>Does that mean there is the _possibility_ of _four_ drives, using up the 
>>>00 and 11 options?
>> 
>> I am curious if 3 or 4 drives could be used. Not that I would need that
>> many. I'm still trying to remember if those ZIP drives connected to the
>> floppy cable, or to something else, like a serial port?
>
>The Zip drive installed in the PC I'm posting from is IDE. There were also
>external ones for the parallel port and USB.
>
>As for the drives, I guess a lot of things are possible if you write
>the code to access them from scratch. Whether this method for selecting
>more than two drives would work may depend on the flexibility of the
>floppy controller.

Ok, I had an IDE Zip drive, and I also had a parallel port one.

Thanks

--- Platinum Xpress/Win/WINServer v3.1