ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
 þ Forwarded By : Bill Grimsley of 3:711/934.18
 þ Original To  : Bill Grimsley of 3:711/934.18
 þ Original From: SquishMail of 3:640/820
 þ Original Date: 05:03 on Wed, Mar 22, 1995
 þ Original Area: netmail
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

This message appears to be routed echomail. This system does not allow
echomail to be routed without prior arrangement.

If this message is not routed echomail, please let me know so that the
problem can be corrected.

- SquishMail FEATURE SqMT v0.3c at 3:640/820

================ b o u n c e d   m e s s a g e   f o l l o w s ===============

Date: 1995/03/21  7:05:50
From: Bill Grimsley (3:711/934.18)
  To: Jeff Green (3:711/934.0)
Subj: debugging

{at}AREA:LOCSYSOP
{at}MSGID: 3:711/934.18 203e6c88
{at}REPLY: 3:711/934.20 20276ede
{at}SOT:

Jeff, at 13:20 on Sun, Mar 19 1995, you wrote to Paul Edwards ...

JG> At the moment I'm still trying to figure out why the MODE 
JG> statement in my btp.cmd file doesn't seem to be having any 
JG> affect. That's on two different UARTS also!

Are you using Ray Gwinn's SIO drivers?  I hear that some versions are
buggy, but I've had no problems with either 1.20 or 1.30 (which is what I
currently use).  How are you installing them from config.sys?  Like this...
?

DEVICE=D:\OS2\SIO.SYS (2:57600,2F8,3,-)
DEVICE=D:\OS2\MDOS\VSIO.SYS (2:57600,2F8,3,-)

The hyphen is an undocumented parameter which supposedly permits sharing of
the serial port, but I've never needed to use it (not that I know of
anyway).  Once again, the mode statement I use with great success (in fact,
just to be sure, my entire bt.cmd) is...

echo off
cls
MODE COM2:57600,N,8,1,DTR=OFF,RTS=HS,OCTS=ON,TO=ON,XON=OFF,BUFFER=ON
if exist \point\binkley.log del \point\binkley.log
if exist \point\squish.log del \point\squish.log
if exist echotoss.log goto Pack
sq386p out squash
goto DoBink
:Pack
sq386p out squash -fechotoss.log
if exist echotoss.log del echotoss.log
:DoBink
bt32
:AfterBink
If Errorlevel 255 goto DoBink
If Errorlevel 254 goto End
If Errorlevel  70 goto DoMail
If Errorlevel  20 goto End
If Errorlevel   1 goto Quit
:DoMail
sq386p -fechotoss.log in out squash link
if exist \point\inbound\z3diff.* call \point\compile.cmd
wimmp
if exist echotoss.log del echotoss.log
goto DoBink
:End
me.cmd
goto Quit
:Quit
cls

I trust you also now have &K3 set in your Netcomm?  If none of the
above works, it's time to buy a new modem IMO.  |-)

Regards, Bill
{at}EOT:


================= e n d   o f   b o u n c e d   m e s s a g e ================


@EOT:

--- Msgedsq/2 3.0