Hey Daniel,

Reading your post about what you did to get emx to work it looks as if you
might have left out a couple of steps.  What I did was pull the INSTALL.DOC
file into my editor and then delete everything that wasn't supposed to be
on the CLI.  I know there are at least 3 .cmd files that have to be run.

Here's a clipping from my config.sys:

set C_INCLUDE_PATH=F:/EMX/INCLUDE
set LIBRARY_PATH=F:/EMX/LIB
set CPLUS_INCLUDE_PATH=F:/EMX/INCLUDE/CPP;F:/EMX/INCLUDE
set PROTODIR=F:/EMX/INCLUDE/CPP/GEN
set OBJC_INLCUDE_PATH=F:/EMX/INCLUDE
set GCCLOAD=5
set GCCOPT=-pipe
set TERMCAP=F:/EMX/ETC/TERMCAP.DAT
set INFOPATH=F:/EMX/INFO;f:/emacs/19.29/info;
set EMXBOOK=emxdev.inf+libref.inf+gnudev.inf+bsddev.inf
set HELPNDX=emxbook.ndx
set SHELL=c:/os2/cmd.exe

Can't remember where/what the 3 .cmd files are but if you're still having
problems when Monday rolls around netmail me and I'll know by then.  Can't
get to my machine except via modem until then.

Good Luck,
Barrie




--- Maximus/2 2.02