>     I've got a 62 Chevy C20 truck that has been modified.  My pumpkin is
> starting to leak oil at the drive shaft.  Is there an easy way to fix
> this with out taking it all apart?
Sort-of. You'll still need to disassemble partially to get to the seal.
Basically, remove the driveshaft, remove the yoke, remove the old seal, take
out used crush sleeve, replace seal, replace crush sleeve, reinstall the
yoke and driveshaft.
Of course, each "style" of rear end is different, and may require other
consumable parts, or dissasembly of the entire unit.
Alex.
 | AmiQWK 2.7 - S/N 0261 |
... The answer is definitely MAYBE, and that's final!
--- OLMS 2.60p.a1+ [EPMBP73M]
---------------