Here is my Kerm_RLF.INI file:
CLS                                      ; Clear screen

Patch

;Log transactions Kermit.LOG             ; Keep a transactions record

Set File Type Binary                     ; No text translations
Set File Collision Rename                ; Beware of the Y2K bug!
Set Attribute Date Off                   ; Cure to the Y2K bug...
Set Parity None                          ;
Set HandShake None                       ; A few things
;Set Delay 0                             ;  to try...
Set Block-Check-Type 3                   ; 16-Bit validation
;Set Bell Off                            ;
Set Send Packet-Length 1024              ; Arbitrary values, adjust for
Set Receive Packet-Length 3072           ;  better transfer rates
Set Window 5                             ; Between 6 to 32 (max.)
;Set Streaming On                        ; Better for Dial-Up

Set Local Off
Set Prompt Kermit>
Set Term ANSI
Set Term Cursor Block
Set Display Regular 8-Bit
Set Terminal ByteSize 8                  ; A test
;

; FOSSIL section
;
Set Port FOSSIL \$(Port)                 ; INT-14/FOSSIL virtual port
;Set Speed \$(BAUD)                      ; This is set in the driver.
;
Set Control UnPreFixed All               ; Clear the default Character
Set Control PreFixed 0 1 129             ;  Escaping, optimize for D/Ls.
;
Set Flow None                            ; Because TCP/IP is used...
;

; Security:  VERIFY and activate the lines with a star at first
;*Disable All                            ; Ignore Server commands
Enable Finish                            ; Allow Transfer Interrupt
Enable Get                               ; Allow Receive Requests
Enable Send                              ; Allow Send requests
;*Disable Query                          ;
;Enable Define                           ;
;Enable Kermit                           ;
;Enable Retrieve                         ;
;
;Disable Assign                          ; No effect
;Disable Message                         ; idem.
;Show Server                             ;

;\$(Action) \$(FileName)                 ; Action (Send/Receive) and the
                                         ; File to be transfered

; Complete and close the transactions record
; Write Transaction \32\32\v(cps) cps\13\10
; Close Transaction

; "Dial" the TelNet ~URL~ by typing "AT DT ~URL~"
Connect



 * * * * *

Am I right to assume that I should change the 1K and 3K packet
tansmissions to 96-byte packets to match the "ancient" 128-byte modem
buffer size assumed in the 1985 WildCat! version of the Kermit protocol?
I will give it a try.  Thanks for the tip!

--- ViaMAIL!/WC v1.60d