Hi everybody,

     About "FDSZ" of April 12:

MS> Having played with `VMWare' somewhat i'd say the answer can be no
MS> under certain circumstances.  I'm not familiar with `SIO'/'VMoDem...

     Ignore this post (my quote from above), for all practical purposes!

MS> ...the interface emulates a UART, if i recall correctly...

     There's an apparence of contradiction between my two posts.  In the
text which wasn't meant for posting (it was a think-pad), ~TelNet~ links
travel thru emulated ~UART~-based Serial-Ports (which would also provide
compatibility with a lot of Communications/BBS SoftWare).  In a 2nd post
(the reviewed version where i retain elements suitable for publication),
euh...  well, i insist a ~FOSSIL~ driver will be mandatory for `FDSZ'...

     In one case i reply no and in the other it's yes.  A contradiction:

                                  ;-)

MS> ...the answer can be no...
MS> ...the short answer is "yes"...

     Obviously, the external file transfer protocol driver would require
~UART~-based interfacing in some cases while in others a ~FOSSIL~ driver
is the kind of interface one needs to have for such a piece of SoftWare.

                                    Salutations,  :)

                                    Michel Samson
                                    a/s Bicephale
                                    http://public.sogetel.net/bicephale/


... DOS+TCP/IP+TelNet+Kermit+.QWK tech may very well have been used here
___ MultiMail/MS-DOS v0.45 - Trying to make TelNet OLMR BBSing UNIVERSAL

--- Maximus/2 3.01