MR>[ The device is DC powered and is quite simple. Four magnets laced
 MR> at 90 deg. from each other are placed on a disc with that same
 MR> oles facing out. 2 Pulsing coils (DC) are then placed at 180
 MR> degrees utside the edge of the disc. An opto switch or reed relay
 MR> is used to ulse the coils from a primary DC source. The coils
 MR> will be omentarily pulsed with an opposite pole of the magnet to
 MR> attract it. The coil harge is then collapsed causing back-emf.
 MR> This creates the reverse ole and repulses the magnet. Simple and
 MR> efficient. Then evenly laced Generating coils (many) are placed
 MR> around the disc to induce power from he rotating magnets. When
 MR> sufficient Regenerator coils are laced they can be fed back to
 MR> the primary to top up the source (ie attery).
Thanks for the info
- It's always the one that you least expect.
... #4: Do *not* go into a new echo and ask "What do ya all do here?"
--- xMail 1.00
---------------