|*****************|Richard Town wrote:
While Eugen was busy watching Star Trek DS9 :), Richard Town wrote..
 RT> Win3.1/3.11 and WfWG 3.11 will not adequately support 115k2
 RT> First two are rated at 57k6.
This is not quite true Richard. Im using a Zoom V.34I+ 33.6 with
WFWG at 115k2 with Trumpet Winsock for the Internet, and I sometimes
run Terminate under WFWG with no problem's either using 115k2
Anyway's, here's the setting's for my Com2 port in SYSTEM.INI that I use.
COMBoostTime=20
Com2AutoAssign=0
COM2FIFO=1
COM2Buffer=1024
COM2RxTRIGGER=8
Oh, and under the Port's section from WIN.INI for COM2 I have it as
COM2:=115200,n,8,1,p
 RT> Still need to adjust the WIN.INI
 RT> file tho.  Speeds higher than 19k2 are not listed in the Control
 RT> Panel, Ports, Settings options for Win3.1/3.11, WfWG lists up to 38k4.
 RT> All will accept a Win.ini setting of 115200 tho, but com overruns are
 RT> the more likely
One would definetly get com overrun's using the plain old
Window's 3.1 comm driver, or even a replacement one for Windows 3.1
but with WFWG, the above setting's from system.ini and win.ini,
I have never gotten any com overrun error's in Winsock.
Internet: Eugen_Woiwod@Mindlink.bc.ca
... Captain on the bridge. (Translated: get off your butts!)
--- Terminate 4.00/Pro
---------------