Good morning to you Jim, how are you today ?

 JH> Bir, some weeks back you told about probs getting the front panel USB
 JH> ports to work.

        My post has nothing to do with the USB ports, I got mine to work
        fine, four of them. But my audio access from one CD is not
        useable as my board says that I can connect both of them but
        there is only one set of the four pin "on-board " connections.
        Is there a Y available for this so that I can use either CD
        device to listen to music while I type away ? I could use the
        other type of connection and I did but the output is not the
        same. ( digital ? )

        Also, I have a front of the box connector for a mike and
        headset. There are two cables running inside that I have not
        connected as the end connectors are marked : audio in and out &
        ground and such for the two cables but the board is not marked.
        Do they go in a special standard order that you would know ?

        In Kamouraska now for the last 3 hours, season is about 4 weeks
        behind here. Lilacs have not bloomed yet. 55ø F.

___ Blue Wave/QWK v2.12
--- Platinum Xpress/Win/WINServer v3.0pr5