04 Jun 2003, 14:23, MIKE ROSS (1:167/133), wrote to JEAN PARROT:

Hi MIKE.

 MR> I read some place that the same speed drives should be on one 
 MR> controller cable to minimize data corruption. Mixing the speeds 
 MR> results in more problems according to what I read.

Haven't heard of anything like that!  If we ran into 'data corruption'
under ANY conditions (or combination of conditions), the drives, or the RAM
or the MB would be returned.


     Good luck...  M.

--- Msged/386 TE 06 (pre)