>      PROBLEM:  I upgraded again, from the 486-50DX to a
 > Cyrus 6x86 and
 >      To an INTEL 1430 VX CHIPSET PENTIUM System Board and
 > now notice
 >      a significant delay reseting the comm port.  It simply
 > will sit and
 >      wait sometimes for 3 or 4 seconds, othertimes for 20
 > seconds or more
 >
 >      Anyone have an idea why?
 
     I spoke to a field engineer at work today about your problem. 
It seems the Cyrix 686's run at a significantly higher speed than other 
processors, and will also accept non-sequential instructions. This seems to 
drive FOSSIL's crazy. His recommendation is to try either DigiFoss or BNU, as 
X00 and the Cyrix 686's seem to not like each other a whole bunch.
 
     BNU is fairly common, but I've never heard of DigiFoss. Hope 
this helps!
 
          Joe
--- Opus-CBCS 1.73a
---------------