-> KJ> resistance to current flow the speaker has.  The best way to see if 
your
-> KJ> speakers will work on your 6 ohm minimum outputs, is to test the
-> KJ> speakers on an ohm meter or multi-meter for their true resistance.  
Even
-> Hi Kurt,
->     How would I go about testing the speaker? I've got an ohm meter. Does 
it 
-> include takeing out the speaker?
        Well, not necessarily.  All you really need to do is put the
positive pin of the ohm-meter on the positive lead or connector of the
speaker and same for the negative and see what the reading is.
Actually, if you have the pins reversed I dont' think it will matter
much, the resistance is still the same.  If you are talking about some
kind of 3-way enclosure, then definitely measure the resistance of the
whole circuit, not just the woofer, because the passive crossover will
add some resistance, too.
--- Platinum Xpress/Win/Wildcat5! v2.0GF
---------------