Hi All!
     I have run X00 as an .exe in a DV window for years.  I have upgraded
     from a 286 to a 386 to a 486-50DX and never had a problem.  I ran
     under DesqView 2.6 and WINDOWS 3.1  Of course port speed went from
     the 8520 to the 16550 with full buffering.  System resets were always
     accomplished without incident and without problem or delay.  On the
     contrary, as expected, as I upgraded through the 286...486 range I
     noticed a relative increase in speed as I went from window to window.
     Both in DesqView and/or Windows 3.1
     PROBLEM:  I upgraded again, from the 486-50DX to a Cyrus 6x86 and
     To an INTEL 1430 VX CHIPSET PENTIUM System Board and now notice
     a significant delay reseting the comm port.  It simply will sit and
     wait sometimes for 3 or 4 seconds, othertimes for 20 seconds or more
     Anyone have an idea why?
Regards,
--- timEd/B8
---------------