In-Reply-To: 
@Message-Id: 
From: "Maynard Riley" 
@X-Yahoo-Profile: wh00sh
@Mime-Version: 1.0
@Mailing-List: list os2user{at}yahoogroups.com; contact os2user-owner{at}yahoogroups.com
@Delivered-To: mailing list os2user{at}yahoogroups.com
@Precedence: bulk
@List-Unsubscribe: 
@Date: Sat, 12 Jul 2003 09:21:06 -0500 (CDT)
Subject: Re: ECSv1.1+sio2k
Reply-To: os2user{at}yahoogroups.com
@Content-Type: text/plain; charset=US-ASCII
@Content-Transfer-Encoding: 7bit

Kevin,

sio2k is indeed different than prior SIO drivers.
I use it, and FaxWorks on an mcp2 system configged over a year ago.

Perhaps something in the following will be useful to you.

````````````````````````````````````````````````````````````
from config.sys:

REM *** Ray Gwinn's SIO2k drivers ***
device=U:\sio2k\uart.sys logfile=U:\sio2k\sio2k.log
device=U:\sio2k\vsio2k.sys logfile=U:\sio2k\vsio2k.log vIrqList(1=4,2=4,3)
device=U:\sio2k\sio2k.sys logfile=U:\sio2k\sio2k.log
rem *** sio2k.sys must be the last line of the SIO2k set ***

===later/further in config.sys: ===

Device=F:\FAXWORKS\Fmd.sys

````````````````````````````````````````````````````````````
com1 is used for traditional serial I/O devices
com2 is internal pci modem for InJoy

FaxWorks Version 3.2h.Ena uses external modem
Send/Receive FMD4 (I/O 2E8, IRQ 3)


I may have made adjustments in Award BIOS, but have no certainty of that.
[disabled com3 ?]


mode com3             
SYS0021: The drive is not ready.   

````````````````````````````````````````````````````````````
sio2k.log reads:

UART.SYS Professional Version, Version  2.03 , Build 20020607 13:50:56
beginning initialization.
Command line processing complete.
The mouse is not using a serial device.
No config file found.
Beginning PCI BIOS scan
Hardware Mechanism=11, PCI bios version=2.10, number of PCI buses=2
PCI BIOS scan complete
Found 3COM/US Robotics 56K Voice Modem (3CP-2976-OEM-50), 1 port board
using IRQ 9, base I/O port is 0D800
Driver name UART1 added to driver chain.
UART1 is using I/O port 3F8
Driver name UART2 added to driver chain.
UART2 is using I/O port 0D800
Driver name UART3 added to driver chain.
UART3 has no assigned hardware.
Driver name UART4 added to driver chain.
UART4 is using I/O port 2E8
UART.SYS, Build 20020607 13:50:51, Version  2.03  - Initialization complete.
UART.SYS is loaded, initialized and ready for action.

SIO2K.SYS Professional Version, Version  2.03 , Build 20020607 13:50:07
beginning initialization.
Version from InfoSeg is 2.45, single processor.
Command line processing complete.
The mouse is not using a serial device.
UART$ reports 4 device(s) to support.
No config file found.
Driver name COM1 (UART$,1,3F8) added to driver chain.
Driver name COM2 (UART$,2,D800) added to driver chain.
Driver name COM3 (UART$,3,0) added to driver chain.
Driver name COM4 (UART$,4,2E8) added to driver chain.
SIO2K.SYS, Build 20020607 13:50:04, Version  2.03  - Initialization complete.
SIO2K.SYS is loaded, initialized and ready for action.



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Coral Calcium for Greater Health. 1 month supply - $23.95
(1 bottle, 90 tablets, 400mg each with Magnesium & Vitamin D)
http://www.challengerone.com/t/l.asp?cid=2805&lp=calcium2.asp
http://us.click.yahoo.com/mcIe3D/v9VGAA/ySSFAA/E8folB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
os2user-unsubscribe{at}yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 



---