In-Reply-To: 
From: Andy Willis 
@X-Yahoo-Profile: abwillis1
@Mime-Version: 1.0
@Mailing-List: list os2user{at}yahoogroups.com; contact os2user-owner{at}yahoogroups.com
@Delivered-To: mailing list os2user{at}yahoogroups.com
@Precedence: bulk
@List-Unsubscribe: 
@Date: Sun, 13 Jul 2003 08:51:20 -0600
Subject: Re: updated lvmgui.cmd
Reply-To: os2user{at}yahoogroups.com
@Content-Type: text/plain; charset=ISO-8859-1
@Content-Transfer-Encoding: 7bit

Mike O'Connor wrote:

>
>>    
>>
>Sorry,
>I hadn't ever seen that - my original eCS 1.0  said exactly that [eCS 
>1.0] at the boot BLOB, but I always have the Boot Recovery Menu enabled 
>- because unlike with eCs 1.0 where the Boot BLOB remained on screen for 
>about 10 seconds, my eCS 1.1 boots go past waaay too fast to interrupt 
>using the keyboard - milliseconds only.  Temporarily disabling the Boot 
>Recovery Menu - the Boot BlLOB shows only the BLOB and "eCS",
no digits 
>following.
>
>Perchance was your system migrated *over* eCS 1.03? Mine are fresh 
>installations, no migration/upgrades done. Four separate installations 
>on adjacent partitions all behave exactly the same way.
>  
>
No, I reformatted the drive.  It was a decisiion I think Chuck Mckinnis 
made (or had a part in).  There was some disscussion of it in the eCS 
newsgroups, I didn't read it real closely as I really wasn't too 
concerned but basically the 3 is because fp3 was installed.
Andy


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy 1, Get 1 FREE
Control Cravings & Hunger EZ! Fast Acting Natural Oral Spray - $19.97
http://www.challengerone.com/t/l.asp?cid=2866&lp=ezappetite3.html
http://us.click.yahoo.com/rJIe0D/99VGAA/ySSFAA/E8folB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
os2user-unsubscribe{at}yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 



---