Hi there, I have a small problem which hopefully somebody out their can
 help me with. I have a Kenwood SMC-33 microphone which appears to have a
 fault in the curly cord. If i have it inserted in my 2 meter set and the
 radio is scanning i only have to move the curly cord ever so slightly and
 the radio stops scanning. This fault also appears if i am stopped on a
 specific frequency, with movement of the curly cord it will suddenly change
 frequency to another memory. The plug on the end is a 2 pin plug with a 
 3.5mm transmit pin and a 2.5mm receive pin. Aswell as this the microphone
 also has 3 memory buttons located on the face of it. What i want to know is
 what is the wiring sequence for this mic. Unfortunately Kenwood seemed fit
 to put a sealed plug on it and i can't get into it to find out what wire
 goes where. Any light that anyone could share on this would be appreciated.
 73 de Allan.
 ZL2SKY.
... MONEY TALKS ...   but all mine ever says is GOODBYE!
-+- OLMS 2.53p UNREG
--- FMail/386 1.02
---------------