On 04-20-1998, Will Honea wrote to James Byrnes about "Install help:"
Will,
Thanks for the quick reply.
WH> Pardon me if I sound a bit pedantic or patronizing, but I've seen
WH> a lot of these questions lately so I'll take a cut at a step by step
WH> - even tho I realize you don't really need it. 
Step by step is just fine with me, I appreciate the detail.
WH> From the been-there-done-that file, I would
WH> suggest that you first kill ALL the partitions - wipe the table
WH> clean.  Boot to the BIOS setup and NOW select LBA - make a note of
WH> the 'cyl/hd/sec' numbers it gives.  Older Bios's had some funny
WH> notions about what LBA was!  On your OS/2 install disks, add the
WH> above geometry to the IBM1S506.ADD line - just to be safe! 
Thanks for this one, never would have come up with it on my own.
WH> From there on, you can screw it up on your own - you don't need my
WH> help  :-}  Just remember to boot the OS/2 install disks and use OS/2
WH> FDISK to re-enable BootManager after W95 hides it. 
I had originallly planned on putting Win95 on first so I wouldn't have
to do it twice but I will follow your route.
Now I will have to tell my daughter to haul her machine home from
school again.  She is already grumbling that I should have bought her a
laptop.
Thanks again for you help.
Regards,  Jim
___
 X KWQ/2 1.2i X I'm WARPed by choice
--- Maximus/2 2.02
---------------