PE> Before I go and ask in the spirit echo for someone to try
PE> FREQing from me, can you tell me whether you are using a
PE> Spirit II or Spirit Thunder?  I want to see if I hang up on
PE> people who call at V32ter with retrains disabled.

FM> It's a Thunder, in spite of what the label says. They had run out of
FM> labels when I got my upgrade and I never bothered to fit it when they
FM> eventually sent it to me.

Brilliant.

FM> Happy to do any test you want. Tell me how you want me to set up the
FM> init string though, specifics for each register - I forgot all that
FM> stuff after I'd done it, may not even be the best possible now.

Can you do an AT*N8, to make sure you have V32ter enabled, or do
an AT*O to see if you already have.  V32ter = 19200 which is what
I want to see if you can connect at.

FM> Discuss this voice if you don't want the day or so delay between mail.

FM> BTW, in spite of what I've read here my call last night was at the old,
FM> 200 and something CPS rate - are you back to 2400?

No, I'm running 28.8k.  I have seen you and Paul Markham connect
at 2400.  Disturbing to say the least.  I think you might have
adjusted your baud rate in Telix to 2400, in which case, your
modem won't connect above 2400.  Be careful though.  After you
have changed it to 38400, if you get a "CONNECT 19200", and then
a bit later I hang up on you, it's probably my fault.  You can
then go to AT*N6 to drop back to 14400, and it should connect OK.

If you can successfully connect at 19200, then I want to know if
you have retrains enabled, and if they are, disable them.  I want
to see if I hang up on you.

BFN.  Paul.
@EOT:

---