Hi, Paul.

PE> PE> Before I go and ask in the spirit echo for someone to try
PE> PE> FREQing from me, can you tell me whether you are using a
PE> PE> Spirit II or Spirit Thunder?  I want to see if I hang up on
PE> PE> people who call at V32ter with retrains disabled.

PE> FM> It's a Thunder, in spite of what the label says. They had run out of
PE> FM> labels when I got my upgrade and I never bothered to fit it when they
PE> FM> eventually sent it to me.

PE> Brilliant.

PE> FM> Happy to do any test you want. Tell me how you want me to set up the
PE> FM> init string though, specifics for each register - I forgot all that
PE> FM> stuff after I'd done it, may not even be the best possible now.

PE> Can you do an AT*N8, to make sure you have V32ter enabled, or do
PE> an AT*O to see if you already have.  V32ter = 19200 which is what
PE> I want to see if you can connect at.

at*o
MODEL:SPIRIT THUNDER
DTE:  57600  N81
DCE:  IDLE

 E1  K1  M0  Q0  V1  X4 TONE
&B0 &C1 &D2 &H0 &L0 &M0 &R2 &T5
*E9 *F3 *G1 *M2 *N8 *P0 *Q0 *S1 *T1 *W0

S00=000  S04=010  S08=002  S15=255
S01=000  S05=008  S09=006  S18=000
S02=043  S06=002  S10=003  S25=000
S03=013  S07=060  S12=050  S26=000
OK
at*n8
OK
at*o
MODEL:SPIRIT THUNDER
DTE:  57600  N81
DCE:  IDLE

 E1  K1  M0  Q0  V1  X4 TONE
&B0 &C1 &D2 &H0 &L0 &M0 &R2 &T5
*E9 *F3 *G1 *M2 *N8 *P0 *Q0 *S1 *T1 *W0

S00=000  S04=010  S08=002  S15=255
S01=000  S05=008  S09=006  S18=000
S02=043  S06=002  S10=003  S25=000
S03=013  S07=060  S12=050  S26=000
OK

Oh, I see. It already was *N8.

PE> FM> Discuss this voice if you don't want the day or so delay between mail.

PE> FM> BTW, in spite of what I've read here my call last night was at the old,
PE> FM> 200 and something CPS rate - are you back to 2400?

PE> No, I'm running 28.8k.  I have seen you and Paul Markham connect
PE> at 2400.  Disturbing to say the least.  I think you might have
PE> adjusted your baud rate in Telix to 2400, in which case, your
PE> modem won't connect above 2400.  Be careful though.  After you
PE> have changed it to 38400, if you get a "CONNECT 19200", and then
PE> a bit later I hang up on you, it's probably my fault.  You can
PE> then go to AT*N6 to drop back to 14400, and it should connect OK.

Here's what I've got, and AFAIK what I've always had. Note the 57600.
And I'm still getting 2400. I have changed *nothing* (consciously)
except adding those two 2-second delays to the Telix script to avoid
over-running you. I'll watch for the CONNECT message on this mail run,
but I don't think I get to see it as I'm running a script.

ΥΝ΅ Comm Parameters ΖΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΈ
³                                    ³
³ Current: 57600,N,8,1,COM2          ³
³                                    ³
³  Speed         Parity         Data ³
³                                    ³
³ A: 300         J: None        Q: 7 ³
³ B: 1200        K: Even        R: 8 ³
³ C: 2400        L: Odd              ³
³ D: 4800        M: Mark        Stop ³
³ E: 9600        N: Space            ³
³ F: 19200                      S: 1 ³
³ G: 38400                      T: 2 ³
³ H: 57600       O: N-8-1            ³
³ I: 115200      P: E-7-1            ³
³                                    ³
³ 1: COM1  3: COM3  5: COM5  7: COM7 ³
³ 2: COM2  4: COM4  6: COM6  8: COM8 ³
³                                    ³
³ Choice, or  to exit?        ³
ΤΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΎ

PE> If you can successfully connect at 19200, then I want to know if
PE> you have retrains enabled, and if they are, disable them.  I want
PE> to see if I hang up on you.

OK, but tell me the AT command to do those things. I guess you'll see
from the AT*O above whether or not I've got them enabled.

Sorry for the question, but it's not easy for me to look this stuff up.
When I moved the PC down here all my ref stuff stayed in the attic,
including the Spirit manual. The attic is now Robert's room, and he's
asleep.

Regards, FIM.

 * * Paint baboon bottoms; leave no stern untoned
@EOT:

---