db> Paul, what is the transmit level of your USR (-dBm)? If it's not already,
db> would you please set it to -13dBm for a while to see if that makes the
db> connections any better? Thanks.
11 it looks like, but I didn't see anything in the manual to
change that. BFN. Paul.
> 07 Feb 01:45:35.25 ATI11I6
# 07 Feb 01:45:35.29 USRobotics Courier V.32bis Dual Standard V.34+ Fax
Link Diagnostics...
# 07 Feb 01:45:35.79 Modulation V.34
# 07 Feb 01:45:35.82 Carrier Freq (Hz) 1829/1829
# 07 Feb 01:45:35.82 Symbol Rate 3200/3200
# 07 Feb 01:45:35.85 Trellis Code 64S-4D/16S-4D
# 07 Feb 01:45:35.88 Nonlinear Encoding ON/ON
# 07 Feb 01:45:35.91 Precoding ON/ON
# 07 Feb 01:45:35.91 Shaping ON/ON
# 07 Feb 01:45:35.94 Preemphasis (-dB) 4/8
# 07 Feb 01:45:35.97 Recv/Xmit Level (-dB) 35/11
# 07 Feb 01:45:35.97 Roundtrip Delay (msec) 3
# 07 Feb 01:45:36.00 USRobotics Courier V.32bis Dual Standard V.34+ Fax
Link Diagnostics...
# 07 Feb 01:45:36.07 Chars sent 35710 Chars Received
421
# 07 Feb 01:45:36.07 Chars lost 0
# 07 Feb 01:45:36.10 Octets sent 35693 Octets Received
332
# 07 Feb 01:45:36.16 Blocks sent 259 Blocks Received
25
# 07 Feb 01:45:36.16 Blocks resent 0
# 07 Feb 01:45:36.19 Retrains Requested 0 Retrains
Granted 0
# 07 Feb 01:45:36.25 Line Reversals 0 Blers
0
# 07 Feb 01:45:36.29 Link Timeouts 0 Link Naks
0
# 07 Feb 01:45:36.32 Data Compression V42BIS 2048/32
# 07 Feb 01:45:36.32 Equalization Long
# 07 Feb 01:45:36.35 Fallback Enabled
# 07 Feb 01:45:36.35 Protocol LAPM 244/6
# 07 Feb 01:45:36.38 Speed 24000/24000
# 07 Feb 01:45:36.41 Last Call 00:00:28
# 07 Feb 01:45:36.41 Disconnect Reason is DTR dropped
# 07 Feb 01:45:36.41 OK
@EOT:
---
* Origin: X (3:711/934.9)
|