On Feb 21, 1996 at 10:46, Paul Edwards of 3:711/934.9 wrote:

 PE> far there have been no reported problems.  I don't like the
 PE> fact that the "Mode 1" light keeps on flashing, but it is

If you switch the three mode lights over to "link status" instead
of "link speed", then the lights will still flash as long as
you're off-line (no CD, as I recall).  I just don't look at the modem and
it doesn't bother me.  The advantage here is that people think I'm really
on-line (when I'm not), so they leave the 'phone alone.  :-)

 PE> So far the only thing I have changed is to go "ATS0=0 and
 PE> AT&W".  BFN.  Paul.

What do you get in response to "AT#V0I9I2I6#V1"?  You may like to
try some of the following settings (after "AT&F.", these are
what I'm using):

AT L0 &D3 &K9 &T5
AT \V1
AT %M2 %U2 #A0 #B1
AT S0=0 S11=70

Yes, I know &K9 is the default.  Cheers..


    - dave
    d.begley{at}ieee.org

---