TIP: Click on subject to list as thread! ANSI
echo: nthelp
to: Glenn Meadows
from: Robert Comer
date: 2003-11-19 19:49:18
subject: Re: Suggestions being taken

From: "Robert Comer" 

You should be able to delete the BM partition using just about any FDISK
program that understands large drives.  That brings to mind another
question that might change things, does your BIOS support that size drive?

- Bob Comer


"Glenn Meadows"  wrote in message
news:3fbbef20{at}w3.nls.net...
> Todays update (and question).
>
> First, I converted the existing drive to NTFS. No problem.  Works fine,
like
> one would expect.
>
> Ghost that, no joy on new HD.
>
> Boot into recovery console, try fixmbr and newmbr.  NO joy.
>
> Try REPAIR installation, files deleted, re-copied, at reboot, just
blinking
> cursor.
>
> Do NEW install to different location on the drive.  Files copy, system
comes
> around for reboot, blinking cursor.
>
> Notice that when the XP Install options are presented, it lists OS/2 Boot
> Manager Partition!!!  AHA!!!
>
> How TF do I remove that these days?
>
> 1). Boot with a DOS (Win98 Emergency Disk) and use FDISK to delete the BM
> partition, and set the NTFS as active partition?
>
> 2). Do I need a copy of the OS/2 FDISK to use that to remove the Boot
> Manager Partition?
>
> It seems that BM does not like something, as I've done this EXACT scenario
> on other laptop HD's, with XPPro, XPHome, Win2k, putting larger HD's in
> place, and NONE have given me the grief that this turd has done.
>
> I need to DESTROY the Boot Manager partition,and make this original drive
a
> CONVENTIONAL HD again.
>
> AARRRRGGGHHHHH!!!!!!
>
> --
> Glenn M.
>
>
> "Glenn Meadows"  wrote in message
> news:3fbb64c6$1{at}w3.nls.net...
> > I'll give that a try, but I think this may be more on point:
> >
> >
>
http://support.microsoft.com/default.aspx?scid=kb;en-us;314057&Product=winxp
> >
> > The Boot Manager/switcher software is Win/Dos based (when you boot to
the
> > IBM Rapid Restore, you get the Windows 98 logo as the DOS program
boots).
> >
> > The drive is still FAT32, was originally installed with Win2K, and then
> > WinXPPro installed over that as an upgrade install.  All was OK, until
now
> > when the drive geometry changed.  What I think I'm going to try next, is
> > convert the existing drive to NTFS, and then re-ghost and see what
> happens.
> > It's possible that the drive was originally formatted using a DOS format
> > command, and as the article says, when copying the drive as an image
file,
> > there are drive geometry issues.
> >
> > Thoughts on the KB article?
> >
> > --
> > Glenn M.
> >
> >
> > "Geo."  wrote in message
news:3fbb50bc$1{at}w3.nls.net...
> > > Do a recovery reinstall and tell it to fix the boot files, either that
> or
> > > install W2K to a temp location then point boot.ini to the right folder
> and
> > > remove the temp install. That should get the boot files back and
pointed
> > at
> > > each other. I believe the NTLDR error is still the boot sector but it
> may
> > be
> > > NTLDR is just missing or boot.ini is seeing something different.
> > >
> > > Geo.
> > >
> > >
> > > "Glenn Meadows"  wrote in message
> > > news:3fbaba2d$1{at}w3.nls.net...
> > > > Here's the problem.  I've got a Laptop HD that's about
full.  It's a
> > 20gig
> > > > HD, with IBM's Rapid Restore woven into it.  It
presents the "Press
> F11
> > to
> > > > access recovery console", so there's some boot
mangling going.  If
you
> > > don't
> > > > press F11, the computer boots normally. (This is on the original
> drive).
> > > >
> > > > Need to migrate the whole machine to a new 40 gig HD.
(The old one
is
> > > still
> > > > Fat32).
> > > >
> > > > Process is use GHOST with both drives installed on a
desktop PC, one
> on
> > > the
> > > > primary IDE, and other on the Second.  Ghost sees both drives
> properly,
> > > and
> > > > will clone both the regular C as well as the hidden
partition.  That
> > being
> > > > done, when I put the 40gig drive back in the laptop, I
get the error
> > NTLDR
> > > > is missing, in other words, the drive won't boot.
> > > >
> > > > Using the XP Pro Install CD, and booting to the recovery console,
I'm
> > able
> > > > to run the various command line options.  I've tried
FIXMBR, NEWMBR,
> > etc.,
> > > > all to no avail.
> > > >
> > > > I'm open to suggestions here.
> > > >
> > > > --
> > > > Glenn M.
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

--- BBBS/NT v4.01 Flag-5
* Origin: Barktopia BBS Site http://HarborWebs.com:8081 (1:379/45)
SEEN-BY: 633/267 270
@PATH: 379/45 1 633/267

SOURCE: echomail via fidonet.ozzmosis.com

Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.