JP>  I have this KR637 just about compleated now. It is all in a case

JP>  Before I close it up, I have the LEDs, the Power ON and the
JP>  Reset leads to connect. In your search, did you ever come up to
JP>  that information ? The leads are marked so that part is easy but
JP>  where do they fit in in this bunch of wires sticking up on the
JP>  bottom right hand corner of the board ? Do they go in horizontal
JP>  or vertical ?

Nobody on the Web seems to want to talk about it either.

(Absolutely NO guarantees that the following info is accurate)
The only thing I could find is:


> KR637 I/O header pinout solved
> From: Steve
> Date: 2/17/2003
> Time: 8:03:46 PM
>
> Comments
> I am placing this here for preservation. These are
> still for sale on ebay and perhaps half.com and ubid.
> Looking from left to right:
>
> 1=pwr led
> 2 no pin
> 3 pwr switch
> 4 pwr switch
> 5 open
> 6 open
> 7 no pin
> 8 open
> 9 open
>
> Bottom row
> 10 pwr led
> 11 hdd led
> 12 reset switch
> 13 reset switch
> 14 open
> 15 open
> 16 hdd led
> 17 open
> 18 open
>
> Be advised if you are a KR 637 owner this board
> is only a resemblance of the BCM IN(EN)440EX. Was
> really built by GVC. You can get drivers for the
> onboard video and sound at Micron. Feel free to
> email me if needed. Thanks Don!
>


  * SLMR 2.1a *

--- Maximus 3.01