Good morning to you Jim.

        I have this KR637 just about compleated now. It is all in a case
        and runs my old Win 98SE. A system is amazingly fast when you
        have not yet added all kinds of apps and PRGs.

        I now have it set at 800 x 600 at 32 bit colours and the Maestro
        sound is great. It does seem that the on-board Nividia sound
        gizmo was dead as now with the ATI Rage II all is fine. I copied
        the Driver file from your HD to the C:\, all is fine.

        Before I close it up, I have the LEDs, the Power ON and the
        Reset leads to connect. In your search, did you ever come up to
        that information ? The leads are marked so that part is easy but
        where do they fit in in this bunch of wires sticking up on the
        bottom right hand corner of the board ? Do they go in horizontal
        or vertical ?

        Thank you for this plate that goes on the back of the case and
        "marries" the shape of all the connectors. I had to do a little
        sheet-metal work on it with shears as it was a triffle too high
        and prevented the board support plate in the case , to fit
        properly and thus the cards could not be pushed all the way home
        into their respective slots. Solved. I also installed that fan
        in the front of the cas to help the big P266 passive radiator to
        keep cool. Time will tell on this.

        Before I placed the ATX PS in there, I took it all apart and got
        rid of a few bunnies, the blades were contaminated.

        As I said before, if you do not give up on me, I will not
        either.           Thanks.

___ Blue Wave/QWK v2.12
--- Platinum Xpress/Win/WINServer v3.0pr5