->    ----- CHARGING.TXT begins -----
-> Charging the 12V 7AH gel cells:

-> Cycle Applications: Limit initial current to 1400mA.

-> Charge until battery voltage (under charge) reaches 14.40 to 14.70
-> volts at 68 F (20 C).

-> Hold at 14.40 to 14.70 volts until current drops to approximately 70mA.

-> Battery is fully charged under these conditions, and charger
-> should either be disconnected or switched to "float" voltage.

-> "Float" or "Stand-by Service": Hold battery
across constant voltage
-> source of 13.50 to 13.80 volts continuously.

-> When held at this voltage, the battery will seek its own current level
-> and maintain itself in a fully charged condition.
->    ----- CHARGING.TXT ends -----

-> The current will vary with the size of the battery, but the voltage levels
-> should be pretty standard across the board.

 True. As an Example we started the Submarine Battery charge at 5000
Amps, waited the the temperature corerected voltage to rose to the
proper point and then held that Voltage until the Charging current
dropped to 500 Amps.   :-)   :-)  :-)
--- Platinum Xpress/Win/WINServer v3.0pr5