Continued



OK

ati15

USRobotics Courier V.Everything CID Status...





OK

ats$

HELP, S Register Functions (CTRL-S to Stop, CTRL-C to Cancel)



S0  Ring to Answer On                  S36 Reserved

S1  Counts # of Rings                  S37 Reserved

S2  Escape Code Char                   S38 Disconnect Wait Time (sec)

S3  Carriage Return Char               S39 Reserved

S4  Line Feed Char                     S40 Reserved

S5  Backspace Char                     S41 # of Allowed Login Attempts

S6  Wait Time/Dial Tone (sec)          S42 Remote Escape Code Char

S7  Wait Time/Carrier (sec)            S43 Remote Escape Code Time (1/50sec)

S8  Comma Time (sec)                   S44 Leased Line Delay Timer (sec)

S9  Carrier Detect Time (1/10sec)      S51 Bit Mapped

S10 Carrier Loss Time (1/10sec)              1 = MNP/V.42 Disabled in V.22

S11 Dial Tone Spacing (msec)                 2 = MNP/V.42 Disabled in V.22bis

S12 Escape Code Time (1/50sec)               4 = MNP/V.42 Disabled in V.32

S13 Bit Mapped                               8 = Reserved

      1 = Reset On DTR Loss                 16 = Reserved

      2 = Do Originate in Auto Answer       32 = Reserved

      4 = No Pause Before Result Codes      64 = Disable Selective Reject

      8 = Do DS0 On DTR                    128 = Enable phone exclusion delay

     16 = Do DS0 On Reset              S53 Bit Mapped

     32 = Disable HST                        1 = Enable Dial Security

     64 = Disable MNP Level 3                2 = Enable Autopass Fallback

    128 = Hardware Reset                     4 = Enable Local Access Psw

S14 Bit Mapped                               8 = Reserved

      1 = Escape Code Hang Up               16 = Reserved

S15 Bit Mapped                              32 = Reserved

      1 = Disable High-Freq EQ              64 = Reserved

      2 = Disable Online Fallback          128 = Reserved

      4 = Disable 450 bps Back Channel S54 Bit Mapped

      8 = Reduced Non-ARQ TX Buffer          1 = Disable 2400 symbol rate

     16 = Disable MNP Level 4                2 = Disable 2743 symbol rate

     32 = Set DEL=Backspace                  4 = Disable 2800 symbol rate

     64 = Unusual MNP-Incompatibility        8 = Disable 3000 symbol rate

    128 = Custom Applications               16 = Disable 3200 symbol rate

S16 Test Modes                              32 = Disable 3429 symbol rate

      1 = Analog Loopback                   64 = Disable V.8 Call Indicate

      2 = Dial Test                        128 = Disable V.8 Mode

      4 = Test Pattern                 S55 Bit Mapped

      8 = Remote Digital Loopback            1 = Disable 8S-2D trellis code

     16 = Reserved                           2 = Disable 16S-4D trellis code

     32 = Reserved                           4 = Disable 32S-2D trellis code

     64 = Reserved                           8 = Disable 64S-4D trellis code

    128 = Reserved                          16 = Reserved

S17 Reserved                                32 = Reserved

S18 &Tn Test Timeout (sec)                  64 = Reserved

S19 Inactivity Timeout (min)               128 = Enable phase roll detection

S20 Reserved                           S56 Bit Mapped

S21 Break Length (1/100sec)                  1 = Disable nonlinear coding

S22 Xon Char                                 2 = Disable TX level deviation

S23 Xoff Char                                4 = Disable preemphasis

S24 DSR Pulse Time (1/50sec)                 8 = Disable precoding

S25 DTR Recognition Time (1/100sec)         16 = Disable shaping

S26 RTS/CTS Delay Time (1/100sec)           32 = Disable V34+

S27 Bit Mapped                              64 = Disable V34

      1 = V21 Mode                         128 = Disable VFC

      2 = Disable TCM                  S57 Reserved

      4 = Disable V32                  S69 Bit Mapped

      8 = Disable 2100hz                     1 = Disable Extrn. PnP

     16 = Disable MNP Handshake              2 = Enable Auto Redial

     32 = Disable V.42                       4 = Reserved

     48 = Disable V.42 Detect Phase          8 = Reserved

     64 = Reserved                          16 = Reserved

    128 = Unusual SW-Incompatibility        32 = Reserved

S28 V32 Handshake Time (1/10sec)            64 = Reserved

S29 Reserved                               128 = Reserved

S30 Reserved                           S70 Bit Mapped

S31 Reserved                                 1 = Enable ring type A

S33 Reserved                                 2 = Enable ring type B

S34 Bit Mapped                               4 = Enable ring type C

      1 = Disable V32bis                     8 = Enable ring type D

      2 = Disable Enhanced V32 mode         16 = Reserved

      4 = Disable Quick V32 retrain         32 = Reserved

      8 = Enable V23 Fallback               64 = Reserved

     16 = Change MR to DSR                 128 = Reserved

     64 = Disable RA Busy Msg

    128 = Disable Terbo

S35 Reserved



OK









Russell



--- Terminate 3.00/Pro