Bill,

David has this new SDL now if you want to take a peek,

This is the US/Canada SDL but I have given it to Steven Anderson to have a

play with as well.







             Terminate scrollback buffer saved  1/Mar/1996 11:36p





ati0

3366

OK

ati1

7536

OK

ati2

OK

OK

ati3

USRobotics Courier V.Everything

OK

ati4

USRobotics Courier V.Everything Settings...

   B0  C1  E1  F1  L3  M1  Q0  V1  X7

   BAUD=115200 PARITY=N  WORDLEN=8

   DIAL=HUNT   ON HOOK   TIMER

   &A3  &B1  &C1  &D2  &G0  &H1  &I0  &K3 
&L0  &M4  &N0

   &P0  &R2  &S0  &T5  &Y1  %N6  #CID=0



   S00=000  S01=000  S02=043  S03=013  S04=010  S05=008  S06=002  S07=060

   S08=002  S09=006  S10=007  S11=070  S12=050  S13=000  S14=000  S15=000

   S16=000  S17=000  S18=000  S19=000  S20=000  S21=010  S22=017  S23=019

   S24=150  S25=005  S26=001  S27=000  S28=008  S29=020  S30=000  S31=000

   S32=009  S33=000  S34=000  S35=000  S36=000  S37=000  S38=000  S39=000

   S40=000  S41=000  S42=126  S43=200  S44=015  S45=000  S46=000  S47=000

   S48=000  S49=000  S50=000  S51=000  S52=000  S53=000  S54=064  S55=000

   S56=000  S57=000  S58=000  S59=000  S60=000  S61=000  S62=000  S63=000

   S64=000  S65=000  S66=000  S67=000  S68=000  S69=255  S70=255



   LAST DIALED #:



OK

ati5

USRobotics Courier V.Everything NVRAM Settings...



   DIAL=TONE   B0  F1  L3  M1  X7

   BAUD=115200 PARITY=N  WORDLEN=8



   &A3  &B1  &G0  &H1  &I0  &K3  &L0  &M4  &N0

   &P0  &R2  &S0  &T5  &Y1  %N6  #CID=0



   S00=002  S02=043  S03=013  S04=010  S05=008  S06=002  S07=060  S08=002

   S09=006  S10=007  S11=070  S12=050  S13=000  S15=000  S19=000  S21=010

   S22=017  S23=019  S24=150  S25=005  S26=001  S27=000  S28=008  S29=020

   S31=000  S32=009  S33=000  S34=000  S35=000  S36=000  S37=000  S38=000

   S39=000  S40=000  S41=000  S42=126  S43=200  S44=015  S51=000  S53=000

   S54=064  S55=000  S56=000  S57=000  S69=255  S70=255

                         STORED PHONE NUMBERS

0:                                      1:



2:                                      3:



4:                                      5:



6:                                      7:



8:                                      9:





OK

ati6

USRobotics Courier V.Everything Link Diagnostics...



Chars sent                    0      Chars Received                0

Chars lost                    0

Octets sent                   0      Octets Received               0

Blocks sent                   0      Blocks Received               0

Blocks resent                 0



Retrains Requested            0      Retrains Granted              0

Line Reversals                0      Blers                         0

Link Timeouts                 0      Link Naks                     0



Data Compression       NONE

Equalization           Long

Fallback               Disabled

Last Call              00:00:00



No Connection

OK

ati7

USRobotics Courier V.Everything Configuration Profile...



Product type           US/Canada Internal

Options                HST,V32bis,Terbo,VFC,V34+

Fax Options            Class 1/Class 2.0

Clock Freq             20.16Mhz

Eprom                  256k

Ram                    32k



Supervisor date        01/23/96

DSP date               01/17/96



Supervisor rev         6.4.5

DSP rev                1.3.0



OK

ati9

ERROR

ati10

USRobotics Courier V.Everything



                            DIAL SECURITY STATUS



    DIAL SECURITY ENABLED:[N]                  LOCAL SECURITY ENABLED:[N]



    PROMPTING ENABLED:[N]                      FORCED AUTOPASS:[N]



    LOCAL ACCESS PASSWORD:[NO PSW]             AUTOPASS PASSWORD:[NO PSW]



ACCOUNT   PSW       ACCT/E DIAL/B NEW_#  PHONE #

   #0     [NO PSW]    [N]    [N]   [N]

   #1     [NO PSW]    [N]    [N]   [N]

   #2     [NO PSW]    [N]    [N]   [N]

   #3     [NO PSW]    [N]    [N]   [N]

   #4     [NO PSW]    [N]    [N]   [N]

   #5     [NO PSW]    [N]    [N]   [N]

   #6     [NO PSW]    [N]    [N]   [N]

   #7     [NO PSW]    [N]    [N]   [N]

   #8     [NO PSW]    [N]    [N]   [N]

   #9     [NO PSW]    [N]    [N]   [N]

OK

ati11

USRobotics Courier V.Everything Link Diagnostics...



Modulation               Unknown Speed

Carrier Freq    ( Hz )   0/0

Symbol Rate              0/0

Trellis Code

Nonlinear Encoding

Precoding

Shaping

Preemphasis     (-dB )

Recv/Xmit Level (-dBm)   0.0/0.0

SNR             ( dB )

Near Echo Loss  ( dB )

Far Echo Loss   ( dB )

Roundtrip Delay (msec)



OK

at&$

HELP, Ampersand Commands (CTRL-S to Stop, CTRL-C to Cancel)



&An   n=0  Disable /ARQ Result Codes   &Pn   n=0  N.American Pulse Dial

      n=1  Enable /ARQ Result Codes          n=1  UK Pulse Dial

      n=2  Enable /Modulation Codes    &Rn   n=0  CTS Follows RTS

      n=3  Enable /Extra Result Codes        n=1  Ignore RTS

&Bn   n=0  Floating DTE Speed                n=2  RX to DTE/RTS high

      n=1  Fixed DTE Speed             &Sn   n=0  DSR Always On

      n=2  DTE Speed Fixed When ARQ          n=1  Modem Controls DSR

&Cn   n=0  CD Always On                      n=2  Pulse DSR, CTS=CD

      n=1  Modem Controls CD                 n=3  Pulse DSR

&Dn   n=0  Ignore DTR                        n=4  DSR = DCD

      n=1  On-Line Command Mode              n=5  Modem Controls DSR, CTS=CD

      n=2  DTE Controls DTR            &Tn   n=0  End Test

&Fn   n=0  Load Factory Configuration        n=1  Analog Loopback (ALB)

      n=1  Hardware Flow Control Cnfg.       n=3  Digital Loopback (DLB)

      n=2  Software Flow Control Cnfg.       n=4  Grant Remote DLB

&Gn   n=0  No Guard Tone                     n=5  Deny Remote DLB

      n=1  550 Hz Guard Tone                 n=6  Remote Digital Loopback

      n=2  1800 Hz Guard Tone                n=7  Remote DLB With Self Test

&Hn   n=0  Disable TX Flow Control           n=8  ALB With Self Test

      n=1  CTS                         &W    Store Configuration

      n=2  Xon/Xoff                    &Yn   n=0  Destructive

      n=3  CTS and Xon/Xoff                  n=1  Destructive/Expedited

&In   n=0  Disable RX Flow Control           n=2  Nondest./Expedited

      n=1  Xon/Xoff                          n=3  Nondest./Unexpedited

      n=2  Xon/Xoff Chars Filtered     &Zn=s Store Phone Number

      n=3  HP Enq/Ack Host Mode        &Zn=L Store Last Phone Number

      n=4  HP Enq/Ack Terminal Mode    &Zn?  Query Phone Number

      n=5  Xon/Xoff for non-ARQ Mode

&Kn   n=0  Disable Data Compression

      n=1  Auto Data Compression

      n=2  Enable Data Compression

      n=3  Selective Data Compression

&Ln   n=0  Disable Leased Line

      n=1  Enable Leased Line

&Mn   n=0  Normal Mode

      n=4  ARQ/Normal Mode

      n=5  ARQ Mode

&Nn   n=0  Highest Link Speed

      n=1  300 bps

      n=2  1200 bps

      n=3  2400 bps

      n=4  4800 bps

      n=5  7200 bps

      n=6  9600 bps

      n=7  12000 bps

      n=8  14400 bps

      n=9  16800 bps

      n=10 19200 bps

      n=11 21600 bps

      n=12 24000 bps

      n=13 26400 bps

      n=14 28800 bps

      n=15 31200 bps

      n=16 33600 bps



OK

at%$

HELP, Percent Commands (CTRL-S to Stop, CTRL-C to Cancel)



%An=  Security Account Information %E=n  Erase Account Information

        Command Structure                n=1  Erase Local Access Psw

%An=PW,ACCT E,DIAL B,NEW#,PH#            n=2  Erase Autopass Psw

      n = (0-9)                          n=3  Erase Accounts Psw

      PW = Password                      n=4  Erase Accounts Phone #

      ACCT E = Account Enable            n=5  Erase Accounts Status

      DIAL B = Dial Back Enable    %Fn   Remote DTE Data Format

      NEW# = New Dial Back #             n=0  8, No parity

      PH# = Dial Back Phone #            n=1  7, Mark parity

%Bn   Remote DTE Data Rate               n=2  7, Odd parity

      n=0    110  bps                    n=3  7, Even parity

      n=1    300  bps              %L=PWn Security Local Access Psw

      n=2    600  bps                    PWn = (0-9)

      n=3   1200  bps              %Pn=s Store Remote Access Pswd

      n=4   2400  bps                    n=0  Query Access Only

      n=5   4800  bps                    n=1  Full Configuration

      n=6   9600  bps              %Pn?  Query Remote Access Pswd

      n=7  19200  bps                    n=0  Query Access Only

      n=8  38400  bps                    n=1  Full Configuration

      n=9  57600  bps              %S=   Psw To Grant Local Access

      n=10 115200 bps              %T    Touch Tone recognition

%Cn   n=0  Defer Configuration     %V=PWn Security Autopass Psw

      n=1  Revert Configuration          PWn = (0-9)

      n=2  Execute Configuration



OK

at$

HELP,  Command Quick Reference (CTRL-S to Stop, CTRL-C to Cancel)



#$    HELP, Octothorpe Commands      Kn    n=0  Call Duration Mode

&$    HELP, Ampersand Commands             n=1  Real Time Clock Mode

%$    HELP, Percent Commands         Ln    n=0  Low Speaker Volume

A/    Repeat Last Command                  n=1  Low Speaker Volume

A>    Continuously Repeat Command          n=2  Med Speaker Volume

AT    Command Mode Prefix                  n=3  Hi Speaker Volume

A     Answer Call                    Mn    n=0  Speaker Off

Bn    n=0  V.32 originate mode             n=1  Speaker On Until CD

      n=1  HST originate mode              n=2  Speaker Always On

Cn    n=0  Transmitter Off                 n=3  Speaker Off During Dial

      n=1  Transmitter On            On    n=0  Return Online

Dn    Dial a Telephone Number              n=1  Return Online & Retrain

      n=0..9#*TPR,;"W{at}!()-                 n=2  Return Online & Speed Shift

DL    Dial Last Phone Number         P     Pulse Dial

DSn   Dial Stored Phone Number       Qn    n=0  Result Codes Sent

D$    HELP, Dial Commands                  n=1  Quiet (No Result Codes)

En    n=0  No Command Echo                 n=2  Verbose/Quiet On Answer

      n=1  Echo Command Chars        Sr=n  Sets Register "r" to
"n"

Fn    n=0  Online Echo               Sr?   Query Register "r"

      n=1  No Online Echo            S$    HELP, S Registers

Hn    n=0  On Hook (Hang Up)         T     Tone Dial

      n=1  Off Hook                  Vn    n=0  Numeric Responses

In    n=0  Product Code                    n=1  Verbal Responses

      n=1  Checksum                  Xn    n=0  Basic Result Codes

      n=2  RAM Test                        n=1  Extended Result Codes

      n=3  Banner/Clock set                n=2-7  Advanced Result Codes

      n=4  Current Settings          Z     Software Reset

      n=5  NVRAM Settings            +++   Escape Code

      n=6  Link Diagnostics          $     HELP,  Command Summary

      n=7  Product Configuration

      n=10 Dial Security Status

      n=11 Extended Link Screen

      n=15 CID Status



OK

Courier 1/23/96 firmware Release Notes



This new firmware adds two new S registers, S69 and S70.  Also added is the 

#CID setting.  Its important that after the new firmware is flashed, that 

these settings be set to 0 and saved to NVRAM.  The USR.CFG file included 

performs that operation.  This can also be done by sending the command 

ATS69=0S70=0#CID=0&W to the modem.  If these S registers are left 

uninitialized, it may cause the modem to work incorrectly.



=============================================================================

NEW FEATURES



The Courier new release addendum documents the following new features in 

detail:





1.  Caller ID (CLID)

--------------------



Caller ID is NOT supported on daughterboard Courier modems.  Only single board

Courier modems support Caller ID.  Owners of daughterboard Couriers may

have their modem modified with a hardware change to support caller ID for a 

fee of $24.95.  Please call Customer Support on 1 800 550 7800 for details.



Both Basic and Extended Caller ID are supported.  Basic Caller ID provides 

the date and time of the caller and the calling party's telephone number.  

Extended Caller ID provides the billing name associated with the calling 

party's telephone number in addition to the Basic service information.



Formatted and unformatted presentation formats are supported.  Formatted 

output presents the Caller ID information as a list of fields and the 

values received by the Courier.  Unformatted output presents the raw 

Caller ID data as a string of hexadecimal characters.



Command summary



#CID=0          Disable Caller ID detection and reporting (default)

#CID=1          Enable Caller ID with formatted output

#CID=2          Enable Caller ID with unformatted output

#CID=3          Enable Caller ID with formatted output and name suppressed

#CID=4          Enable Caller ID, do not transmit the information to the

                DTE (computer), but retain it in the Courier's memory.  ATI15

                will display the Caller ID information

#CID?           Display current Caller ID setting

#CID=?          Display the Caller ID settings that are available

#$              Display summary of # commands available

I15             Display Caller ID information for last call.  Both formatted

                and unformatted output is presented





2.  Distinctive Ring

--------------------



Distinctive Ring is sometimes known as MultiRing or RingMaster.  It is a 

service provided by the local telephone company that permits the assignment 

of multiple telephone numbers to one line.  Each number is associated with a 

different ringing pattern.



The Courier recognizes four ring patterns known as ring A through D.



Command Summary



S70     Bit     value   Distinctive Ring Recognition

         0      1       RING A

         1      2       RING B

         2      4       RING C

         3      8       RING D

        4-7             Reserved



A setting of S70=0 disables distinctive ring.  The Courier will return a 

result code of RING for either Ring type A or B.  Settings bits 0 through 3 

will enable distinctive ring and the Courier will recognize the ring type 

selected by the bits which are turned on.  The Courier will return a result 

code of RING A, RING B, etc.



New Result Codes



RING A          170

RING B          171

RING C          172

RING D          173





3.  Plug and Play

-----------------



The Courier modem now supports Plug and Play as defined by the Microsoft

Plug and Play Specification for External COM devices v1.00.  To disable Plug

and Play for the external, set S69.0=1.  The default is S69.0=0 which enables

Plug and Play for the external Courier modem.



A new Courier ISA bus modem will begin shipping in March 1996.  This new

internal Courier (ISA bus) supports Plug and Play, but is shipped configured 

for COM2: IRQ 3.  To configure the Courier ISA bus modem for Plug and Play, 

set the COM jumpers to cover both positions on columns B and C.





4.  Carrier Loss Dialback

-------------------------



The Courier can now re-establish lost connections automatically.  To enable

this feature, set S44.1=1 (S44=2).  When a connection is lost and carrier is

no longer present, the modem will wait the time specified by S44 (seconds)

and then redial the previously dialed number.  The Courier will attempt to

reconnect up to 10 times.



=============================================================================

FIXES AND IMPROVEMENTS



1.  When the modem is configured to reset on DTR drop, it will now send a

    V.42 DISC command to the remote modem before disconnecting and resetting.



2.  ATI3 changed to output banner "USRobotics Courier V.Everything".  ATI3

    can still be used to set the modem's clock in the same manner as previous

    firmware.



3.  Corrected intermittment failure to send TSI frame in Class 2.0 fax.



4.  Corrected ability to use ";" to send multiple commands in fax
mode.  ie.

    AT+FCLASS=2.0;+FAA=1 now works.



5.  Improved V.25bis to support ">" and ":" dial modifiers.



6.  Added &ZC to AT&$ help screen.









Russell



--- Terminate 3.00/Pro