=============================================================================

* Forwarded by Russell Brooks (3:640/305.55)

* Area : USR_MODEMS

* From : Gene Lowry, 1:300/11 (26-Feb-96  18:02:02)

* To   : Ken Abrams

* Subj : CRC'S & port speed.

=============================================================================

In a message of  Ken Abrams (1:2430/2) writes:



 KA> 3) The init string is probably OK but a much simpler approach is

 KA>    to send AT&F1&W to the modem once by hand and then make your

 KA>    init string ATZ^M.



There is one caveat in this, the AT&F1&W _MUST_ be done at the same
DTE speed

as will later be used by any mailer or BBS.  Otherwise the modem wakes up on

a call at a different speed and chaos results.

   Gene Lowry



 



-!- msged 2.07

 - Origin: Bigfoot's RBBS - Tucson,AZ - HST/V.34 -  or  (1:300/11)

=============================================================================









Russell



--- Terminate 3.00/Pro