PT> > 
PT> >  >  >  > I did that where you add the node I put 0 =zip and its
PT> >  >  >  > not working. can I do to make it work polease?
PT> >  >  >  >
PT> >  >  >
PT> >  >  >
PT> >  >  > You might want to look in the Fido setup.  As well, is pkzip
PT> >  >  > in the path?
PT> >  >  >
PT> >  > That did not work. Is there any way this can be done please?


PT> > Ask me again next week.  I'll pull out the PCB CD and check it.  I
PT> > no longer run PCB so going from memory I can only tell you that
PT> > yes, it can be done, but not sure any more how.


PT>Well I can not find it and I download the entire pcboard docs and
PT>re-read it like overf 50 times.  

PT>What batch file I need to download to get the downlaod zmodem and
PT>xmodem to work and can you please provide me with a example?

The setup is in PCBSETUP under configuration files under Protocol Data 
File menu option.  The system shells out to a batch file based upon the 
letter that corresponds to the transfer procotol.  Here's mine:

                             Transfer Protocols
                   Port Lock
 Use Type Size MNP Open Lines             Protocol Description
 --- ---- ---- --- ---- ----- -----------------------------------------
  A   I    128  N   N     N   Ascii
  X   I    128  N   N     N   Xmodem/Checksum
  C   I    128  N   N     N   Xmodem/CRC
  O   I   1024  N   N     N   1K-Xmodem       (non-BATCH Ymodem)
  F   I   1024  Y   N     N   1K-Xmodem/G     (non-BATCH Ymodem/G)
  Y   I   1024  N   N     N   Ymodem BATCH
  G   I   1024  Y   N     Y   Ymodem/G BATCH
  Q   D   1024  N   N     Y   PCBoard's Internal Zmodem
  Z   D   1024  N   N     Y   Zmodem (batch)

In this case I use GSZ for Zmodem and Q for PCBoard's internal Zmodem.  
PCBoard will shell out to batcfiles with the naming convention of:

PCBRQ.BAT - Internal Zmodem receive
PCBSQ.BAT - Internal Zmodem send 
PCBRZ.BAT - Zmodem (batch) receive (GSZ for me)
PCBSZ.BAT - Zmodem (batch) receive (GSZ for me)

Here's my copy of the PCBRQ.BAT:

if %PCBOS2% == N goto dos
call environ.bat

:dos
pr1 rz -p %3
echo off
if exist pcberr.fil del pcberr.fil
if exist pcbdsz.log del pcbdsz.log
zmrecv.exe %3


And PCBSQ.BAT

if %PCBOS2% == N goto dos
call environ.bat
echo off
if exist pcberr.fil del pcberr.fil
if exist pcbdsz.log del pcbdsz.log
zmsend.exe %3


I hope this helps.  You may want to use Z for internal instead of Q.  


Jeff

--- PCBoard (R) v15.3/M 10