Hello David,
donderdag 14 oktober 1999 21.17, David Calafrancesco wrote to Kris Steenhaut:

 DC> Your mouse is a serial mouse on Com4 (2E8, Irq 3),

Why do you say that? My mouse is since always a PS/2 , irq 12:

Device=E:\OS2\Boot\PMDD.Sys
Device=E:\OS2\Boot\PointDD.Sys
Device=E:\Os2\Rodent.Sys Protocol=PS IRQ=12 DPI=640 BAUD=19200
Device=E:\OS2\Boot\Mouse.Sys TYPE=RODENT$
Device=D:\Techniek\Quatech\qcom.Sys (1,3F8,4) (2,2F8,3)
REM Device=D:\Techniek\Sio\Sio.Sys
REM Device=D:\Techniek\Sio\Sio.Sys (3,03E8,5)
REM DEVICE=E:\OS2\BOOT\USBCOM.SYS
Device=D:\Modem\Faks\FMD.Sys

++++ Knip.....Einde van het bestand config.sys .....++++

 DC>  and as a result it
 DC> conflicts with the MGA chip that accesses that IO port. Move the
 DC> serial port to a different IO address.

Do you see any other possibility, besides replacing the Matrox?


    Groeten uit Gent,
    Regards/2

      Kris

--- GoldED/2 3.0.1  FMail/2 1.48/g