Trevor Davis wrote to All on 04-14-1998
TD> I am running OS/2 2.1 and have a modem on Com1 and Com2 and a
TD> mouse on Com3. I am running SIO and have the following SIO commands
TD> in config.sys
TD> 
TD> DEVICE=C:\SIO\SIO.SYS  (COM1:38400,3F8,4,-,F) (COM2:38400,2F8,3,-,F) 
(COM4:38400
TD> ,2E8,9,-,F)
SIO.SYS should promptly inform that you've got an error, since one of
the ports is assigned to the MOUSE, whose driver comes before SIO.SYS. 
I would expect that the ports are not being intialized properly and
that the mouse is NOT being found on the cold boot.  Anyway, remove all
references to the mouse port from the SIO.SYS line - com3 is no longer
a serial i/o port, it's the mouse port.
Will Honea 
--- Maximus/2 2.02
---------------