* In a message originally to All, Jeff Mcclain said:
 > ÿ@SUBJECT:OS/2 Update Wizard Word Around
 > N
 > This is the work around for Upgrading/Updating US Robitics
 > modems with
 > the Update Wizard:
 > Manufacturer/Support
 > IBM
 > OS/2 Warp 3.0 and 4.0:
 > Issue: Update Wizard locks system. This happens when the
 > program
 > searches the COM ports for any connected modems.
 > Solution: You will need a copy of the Cybercomm communication
 > drivers
 > for Windows 3.x. The file (cyberdrv.zip) can be downloaded
 > from our BBS
 > at 847-982-5092.
 > 1. Install the Cybercomm driver in a WIN-OS/2 Full Screen
 > session.
 > 2. Edit your config.sys and remark out the current OS/2
 > communication
 > driver.(To remark out a statement in your config.sys, add REM
 > and a
 > space in front of the line you do not want to load. The Comm
 > drivers are
 > com.sys and vcom.sys or sio.sys and vsio.sys.) Save the file,
 > exit,
 > and reboot the computer.
 > 3. Install the Update Wizard in a WIN-OS/2 Full Screen
 > session. Then
 > perform the upgrade or update.
 > 4. Edit your config.sys and take out the remarks you added in
 > step two.
 > (Delete the REM and space.) Save the file, exit and reboot
 > the
 > computer.
I have found that you can omit steps 2 and 4.  Simply modifying the Win-OS/2 
communications drivers was sufficient to allow Win-OS/2 to use the Upgrade 
Wizard, after closing all Win-OS/2 sessions and then opening up a new 
Win-OS/2 session to run it.
Larry
--- RA/Pro 2.50
---------------