-=> Quoting Stuart Wright to Bro Mcleod <=-
 SW> Getting FIFO support under Windows is a bit trickier. It depends on
 SW> which version you're using. Here's what you'll have to do to get it:
 SW> Windows 3.1 FIFO support
 SW> Make sure the following line is present in the [boot] section of the
 SW> SYSTEM.INI file:
 SW> COMM.DRV=COMM.DRV
Win3.1 and Win3.11's comm.drv is inadequate
Change to either WFXCOMM.DRV (free with supplied Delrina WinFax)
or Cybercom
 SW> Windows 3.1 and 3.11- Set the port speed to 115200 by going under
 SW> Control Panel, then Ports, and set the baud rate to 115200, even
 SW> though it is not listed as an option. It will work nicely (or has for
 SW> me for the past 3 years).
Win3.1/3.11 and WfWG 3.11 will not adequately support 115k2
First two are rated at 57k6. (havn't seen any comms docs for
WfWG3.11)  Still need to adjust the WIN.INI
file tho.  Speeds higher than 19k2 are not listed in the Control
Panel, Ports, Settings options for Win3.1/3.11, WfWG lists up to 38k4.
All will accept a Win.ini setting of 115200 tho, but com overruns are
the more likely
rgdZ
Richard
--- FMail/386 1.02
---------------