-=> Quoting Stuart Wright to Bro Mcleod <=-
 SW> I don't think your modem is the problem. I think it's ProComm Plus
 SW> that's holding you up. I had a similar problem when I installed a Zoom
 SW> V.34I 28800 about 2 years ago
 SW> Modem "Zoom V.34I 28800 V.34/V.FC/Fax"
 SW> transmit "AT^M~~AT&F^M~~~"
 SW> transmit "AT&C1&D2\A3&S1L0M0^M~~"
There's an &f missing after the first AT
 SW> transmit "ATS7=60S11=55S95=44^M~~"
 SW> set baudrate 115200
 SW> transmit "AT^M~~AT&W1^M~~"
 SW> initstring="ATZ1~~^M"
Was this from Procom's MODEM.DAT file?  If so then no
wonder you didn't get full performance from your Zoom
Also writing an init to NVRAM every time is a big no, no!
NVRAM has a finite write life.  Ok, tens of thousands of
writes, but it is finite
rgdZ
Richard
--- FMail/386 1.02
---------------