- Steve McCrystal discussed "GL518SM" with Marc Weinmann -

 MW> Is there any software out that will read a GL518SM (GenesysLogic)
 MW> hardware monitor chip under OS/2? It's installed in a Tyan
 MW> Trinity AT 1590S.

SM> Not that I know of, but I'm beating on a couple of guys to add it to 
SM> their existing programs.  The problem seems to be getting sufficient 
SM> info from Genesys Logic to be able to do so.
SM> I have the chip on a DFI K6VB3+ motherboard.

Hrm.. I have second question. What chip do you have? I'm trying to figure out
the "norm" for an AMD k6-2/350. I've already had to disable the warning..
when it's worked, the temp can easily pass 60C. No problems with it tho. The
AMD specs dont mention an on die temperature, just they want the ambient temp 
between 0-70C. This is the temperature measured on the TOP of the chip, not
on the bottom where the probe is.

Marc

--- Telegard v3.09.g2-sp3/mL
280/801
2433/225