JEFF GUERDAT wrote to RANDAL KOHUTEK
JG>RK>And yes, I used coax, and yes I had t-connectors and terminators.
JG>RK>The problem was: 1) I could see my own computer in it's own
JG>RK>workgroup, while looking at my computer.  2) He could see his
JG>RK>computer in a workgroup _* with the same name *_ on his computer.
JG>RK>3) The computers couldn't see each other, though.
JG>RK>All peer to peer drivers were installed : IPX/SPX, NetBEUI, as
JG>RK>well, the NICs showed up in the network setup box.
JG>I'm not clear as to what the workgroup name(s) is/are so let me say
JG>the obvious - the workgroup name must be exactly the same..
In my situation this was not as obvious as I would have liked it to be.  
Until I figured out that my workgroup name was different, (I had changed 
it) my machine would try to dial out whenever I double clicked on 
certain desktop shortcuts and when I tried to access RAS service.
Numerous answers given to me in the MS Newsgroups brought no joy.  Of 
course my problem was brought about by my own inexperience.   I'm 
learning (but maybe not as fast as I wish).
Have a good holiday season.
Address E-Mail to: cscag37@airmail.net
CMPQwk 1.42 1262
--- QScan/PCB v1.19b / 01-0530
---------------